Mechanical Problems/Vehicle Issues and Fix-it Forum If you've got a problem you just can't figure out, a noise you can't diagnose, or a Check Engine Light that won't go away, ask about it here!

injectors

Thread Tools
 
Search this Thread
 
Old Oct 19, 2005
  #1  
mishkakasalapiy's Avatar
Thread Starter
Registered!!
 
Joined: Dec 2004
Posts: 2
Likes: 0
Rep Power: 0
mishkakasalapiy is an unknown quantity at this point
injectors

i have 370cc rc injectors and vafc controller installed on my 2000 si. now the rpms dont go past 3000 rpms. when you press the gas farther in and hold it there it seems like the car is gonna stall and when you let go of the gas it does stall.any idea what can be the problem?
how many cc's are the stock hondas injectors?
should i just take out the 370cc injectors and vafc controler and use stock injectors.
Reply
Old Oct 20, 2005
  #2  
streetglower's Avatar
Registered!!
iTrader: (13)
 
Joined: Apr 2003
Posts: 17,176
Likes: 3
From: Miami (Pembroke Pines), Florida
Rep Power: 453
streetglower is a name known to allstreetglower is a name known to allstreetglower is a name known to allstreetglower is a name known to allstreetglower is a name known to allstreetglower is a name known to allstreetglower is a name known to all
I dont know if that is related to your problem but it may be, but unless you are turboed or something there is no need for bigger injectors. the only time you need bigger injectors is when you have a big increase in air flow. You might be getting too much fuel which interupts the air/fuel mixture and causes it to almost stall when you give it gas.

Try putting the stock injectors back in and see if the issue goes away.

Last edited by streetglower; Oct 20, 2005 at 04:59 AM.
Reply
Related Topics
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
runawaykinms
Engine
15
Mar 22, 2019 10:32 AM
Dave Brabant
6th Generation Civic 1996 - 2000
1
Sep 27, 2015 09:43 PM
Luluharp
Engine
3
Sep 27, 2015 11:56 AM
Bruce2
Mechanical Problems/Vehicle Issues and Fix-it Forum
1
Sep 21, 2015 08:01 PM
Donahue
I.C.E. (Audio) & Electrical Upgrades
11
Sep 9, 2015 05:55 PM




All times are GMT -5. The time now is 08:42 PM.