sdaidoji

iTrader: (1)

no probs, man! great info!
That will help a lot of other folks around here to avoid going to the stealer!

Mourtzy

Just diagnosed my Civic.. Got a P0312 goin on here, my 12th Cylinder has misfired
Great info! Thanks for posting!!

EM2CHIKO

Had my 04 civic lx scanned with an OBDII scanner, and said no codes, but tried a newer model, and it pulled a 0511 code. replaced the Iacv and wasn't able to remove the code yet.. seems the car does operate better but still acts up a little.. is it because havent erased the code yet?? and what exactly does circuit malfunction mean???

sdaidoji

iTrader: (1)

just found this.
did not go through the site yet, to see, but could be a what-to-do- when the code comes up. will dig in there when i get a chance
http://www.obd-codes.com/trouble_codes/honda/

Hooper_Sir13

I got codes p1298 and p1106 on my 2002 honda civic sir i just had my alternator and 2 o2 sensors changed don't know if that would have anything to do with it though

sdaidoji

iTrader: (1)

instead of just posting, why not check the link i posted? ...

Hooper_Sir13

so the link gave me the codes p1106 BARO Circuit Range/Performance Malfunction
and P1298 Electrical Load Detector Circuit High Voltage

ways to fix this?

sdaidoji

iTrader: (1)

have you tried searching in there? i got 2 pages in there just for the P1298 honda search key words...
One of them:
http://m.obd-codes.com/forums/viewtopic.php?f=2&t=3516

sdaidoji

iTrader: (1)

and in case you did not notice, this thread is for consulting, not for asking what to do about which code, so that is the reason i am not answering your question directly.
That was the reason i posted that link, so people would actually go there to see what actual solutions would be there.

Hooper_Sir13

so i was doing research and found it could o2 heater electrical im not quite sure what that means i changed both my o2 sensors so i dont see how it could be them

johndeerebones

Yes it does make sense. 9 times out of 10 heater or response time codes are the heaters themselves which are in the sensors themselves. Like said, make a thread on it, this thread is for information, not fixes.