taking door panel off

Reply Subscribe

Thread Tools

Search this Thread

Dec 19, 2003

hondaciv01

Thread Starter

Registered!!

Joined: Nov 2003

Posts: 991

Likes: 0

From: Dtown, michigan

Rep Power: 0

hondaciv01 is an unknown quantity at this point

taking door panel off

i'm taking my door panel off to fix a dent that is on my passengar side door. i read the diy but am still having a few problems and have questions i gotta ask. I can't get the door hinge off, after i unscrewed it from everything, and i can't get anything else to move after i unscrewed the bolts on the arm rest that is attached to the door. i know this isn't very descripitive at all, but any help is appreciated

Dec 19, 2003

robbclark1

Retired suspension supermod.

Hey! Look At Me!! I'm a Supporting Member!!

iTrader: (8)

Joined: Aug 2001

Posts: 10,857

Likes: 0

From: Gaithersburg, MD

Rep Power: 412

there are a few screws. One in the arm rest under that little plastic cover. and then two bigger ones after you take off the arm rest. There are some behind the door handle. The rest is just pull the fvck out of it. It will pop off eventually.

Last edited by robbclark1; Dec 19, 2003 at 10:56 PM.

Dec 19, 2003

gearbox

Premium Member

Hey! Look At Me!! I'm a Supporting Member!!

iTrader: (95)

Joined: Sep 2002

Posts: 51,241

Likes: 20

From: NV

Rep Power: 811

The door handle has a latch with plastic holder that has to be taken out. You can see it through the panel. It's easy to use your fingers, but a screwdriver may work.