SFpower turbo system group buyPLEASE READ FIRST POST!!!
#1
Former Sponsor
Thread Starter
iTrader: (4)
Join Date: Mar 2003
Location: lancaster, California, US
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 SFpower turbo system group buyPLEASE READ FIRST POST!!!
many of you have expressed an interest in a turbo system that is afforable, complete,high qulity,reliable and kicks a$$ on the steet.well heres your chance i biuld costom turbo systems i have just recently decided to make some kits that the average guy can install in his on garage.these ar not a throw it together kit .each kit is built buy hand one at a time it is a custom kit i will duplicate. Now i can offer this kit for 2900.00 if i have a group buy of 10 or more otherwise the system is 3500.00 for all you loners out there.PLEASE ONLY POST HERE IF YOU WANT ONE AND LEAVE YOUR E-MAIL ADRESS SO I CAN CONTACT YOU.
t-3 turbo,custom manifold,intercooler piping.intercooler(9"x19"x23/4 core +tanks),down pipe to stock exhust ,air intake,bov.P.F.M.(revalutionary fuel controller),oil lines & fitting for the pan,pictures & instuctions(in inglish)
i wil post pics and dyno numbers very soon
t-3 turbo,custom manifold,intercooler piping.intercooler(9"x19"x23/4 core +tanks),down pipe to stock exhust ,air intake,bov.P.F.M.(revalutionary fuel controller),oil lines & fitting for the pan,pictures & instuctions(in inglish)
i wil post pics and dyno numbers very soon
Last edited by SFpower; 03-29-2003 at 12:12 PM.
#2
Registered!!
iTrader: (5)
Join Date: Jun 2002
Location: Springfield, Ohio, US
Age: 41
Posts: 772
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 i am down for it depending on my satisfaction of pics and dyno numbers...also is shipping included?
email: ohmysac@woh.rr.com
email: ohmysac@woh.rr.com
#3
Registered!!
iTrader: (1)
Join Date: Mar 2003
Location: Chicago, Illinois, US
Age: 37
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 i am interested too, this 127 sohc just isnt cutting it!! details details!!
Nineinchnails613@hotmail.com <---- email
JoHn
Nineinchnails613@hotmail.com <---- email
JoHn
#7
#1 S2000 Fan
iTrader: (2)
Join Date: Oct 2002
Location: The home of a million legends
Posts: 1,992
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Isn't this the same guy who posted something like this not to long ago.
Well if it isn't give us more info
Like everyone says.........Where are the pics???
Well if it isn't give us more info
Like everyone says.........Where are the pics???
#9
Registered!!
Join Date: Mar 2003
Location: NJ
Age: 47
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 I am in also with some dyno info
irishmc76@hotmail.com
irishmc76@hotmail.com
#13
Registered!!
iTrader: (2)
Join Date: Mar 2003
Location: Lancaster, California, US
Age: 40
Posts: 3,071
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 288 Here is a pic of the manifold
courtesy of SFpower and Catalyst
This is my car.
if that doesnt work, here is the link
http://www.geocities.com/teamcatalys...civicturbo.jpg
and if that doesnt work, then i attached it as well
courtesy of SFpower and Catalyst
This is my car.
if that doesnt work, here is the link
http://www.geocities.com/teamcatalys...civicturbo.jpg
and if that doesnt work, then i attached it as well
#15
Registered!!
iTrader: (2)
Join Date: Apr 2002
Location: D-TOWN MI
Age: 41
Posts: 1,142
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 280 With this new fuel system, what do you estimate the boost will be able to get to? I belive riceburnerex has 8 or 9 PSI of boost with out anything like that, and that gave him 198whp. Thanks alot
~nick~
~nick~
#17
Former Sponsor
Thread Starter
iTrader: (4)
Join Date: Mar 2003
Location: lancaster, California, US
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 i have run upto 14 psi w/ this system and made 300hp to the ground but it was on a stock 1.8LS non vetec we where just testing the fuel system
#18
Registered!!
iTrader: (2)
Join Date: Apr 2002
Location: Philadelphia, PA
Age: 45
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 i'm in
mike0404noga@hotmail.com
mike0404noga@hotmail.com
#22
Registered!!
Join Date: Mar 2002
Location: bay area, california
Posts: 4,344
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 314 are you going to eventually part kits out? or will you ONLY sell this as a complete kit? you say you are building this custom one at a time, does that mean you cna make custom changes based on customer desires?
#24
Registered!!
iTrader: (3)
Join Date: May 2002
Location: Jonestown, Pennsylvania, US
Age: 40
Posts: 1,438
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 just to make an important note, if you put a turbo as big as the T-3 on a little engine like ours, there will be lag till around 3000-3500 rpm, ask some of the others on the site what theyre running, im sure theyll tell you theres a lot of lag. and look at the manifold, it may look clean but look at the primaries, theyre all different lengths, it doesnt look like they tried to make them similar, which is important for best performance. how much R&D time went into this system man?
#26
Registered!!
iTrader: (2)
Join Date: Mar 2003
Location: Lancaster, California, US
Age: 40
Posts: 3,071
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 288
just to make an important note, if you put a turbo as big as the T-3 on a little engine like ours, there will be lag till around 3000-3500 rpm, ask some of the others on the site what theyre running, im sure theyll tell you theres a lot of lag. and look at the manifold, it may look clean but look at the primaries, theyre all different lengths, it doesnt look like they tried to make them similar, which is important for best performance. how much R&D time went into this system man?
This manifold is made in such a way that the length of the primaries are as short, and as close to equal length as possible.
dont try to trash something that is nicer than the rest of the turbo kits youve ever seen for our cars.
After all, do you think Fiber Images would put a Piece of crap turbo kit on their car? Expecially after spending all that money on carbon fiber?
Think before you speak, and dont trash something based on a picture.
This kit is based on Staffords other kits, which make awesome street power. You want to see the dyno chart for my CRX with his kit on it? my crx went from 88 hp and 89 ft/lbs of torque (to the ground) to 215.1 hp and 176 ft/lbs to the ground.
Heres the numbers for my CRX, this was at 10 psi of boost
THIS IS NOT MY CIVIC, it is an 89 CRX HF
#27
Registered!!
iTrader: (2)
Join Date: Mar 2003
Location: Lancaster, California, US
Age: 40
Posts: 3,071
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 288 another thing to add, the T3 was not too big for my little 1.6L in my crx, which only had 88 hp to the ground. Since our civics have a 1.7L engine that makes more than 88 hp to the ground, you can probably expect some pretty good numbers from the new kit.
We will know as soon as my piping goes back on my car, so just wait until we have real numbers before you guys start trash talking again.
We will know as soon as my piping goes back on my car, so just wait until we have real numbers before you guys start trash talking again.
#30
Registered!!
iTrader: (2)
Join Date: Mar 2003
Location: Lancaster, California, US
Age: 40
Posts: 3,071
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 288 The thing that is wrong with a log style manifold is that the exhaust charges do not get to the turbo at the same time. Each cylinder's exhaust gas gets there in differing amounts of times, meaning that 2 cylinders can enter the turbo at the same time.
The log style manifolds are not Horrible, it is just that equal length manifolds give better spooling time, and they just look awesome.
The log style manifolds are not Horrible, it is just that equal length manifolds give better spooling time, and they just look awesome.