SFpower turbo system group buyPLEASE READ FIRST POST!!!
 

many of you have expressed an interest in a turbo system that is afforable, complete,high qulity,reliable and kicks a$$ on the steet.well heres your chance i biuld costom turbo systems i have just recently decided to make some kits that the average guy can install in his on garage.these ar not a throw it together kit .each kit is built buy hand one at a time it is a custom kit i will duplicate. Now i can offer this kit for 2900.00 if i have a group buy of 10 or more otherwise the system is 3500.00 for all you loners out there.PLEASE ONLY POST HERE IF YOU WANT ONE AND LEAVE YOUR E-MAIL ADRESS SO I CAN CONTACT YOU.

t-3 turbo,custom manifold,intercooler piping.intercooler(9"x19"x23/4 core +tanks),down pipe to stock exhust ,air intake,bov.P.F.M.(revalutionary fuel controller),oil lines & fitting for the pan,pictures & instuctions(in inglish)


i wil post pics and dyno numbers very soon :damn:

i am down for it depending on my satisfaction of pics and dyno numbers...also is shipping included?

email: ohmysac@woh.rr.com

i am interested too, this 127 sohc just isnt cutting it!! details details!!
Nineinchnails613@hotmail.com <---- email

JoHn

maybe if youd learn to spell you would sell more systems

geez more ppl bashing him for no reason.

so she had some typos or spelled wrong. who cares.

oooh turbo... i like

Isn't this the same guy who posted something like this not to long ago.
Well if it isn't give us more info

Like everyone says.........Where are the pics???

what about an external wastegate?

I am in also with some dyno info
irishmc76@hotmail.com

details....

post dyno

I'm interested, but I just need to see some pics and the dyno sheet, then I'll decide.

Here is a pic of the manifold

courtesy of SFpower and Catalyst

This is my car.

http://www.geocities.com/teamcatalys...civicturbo.jpg

if that doesnt work, here is the link

http://www.geocities.com/teamcatalys...civicturbo.jpg

and if that doesnt work, then i attached it as well

:damn:
so fresh and soo clean ... nice job on the fabrication ... !
i'm interested .... please post the dyno sheets...!!

With this new fuel system, what do you estimate the boost will be able to get to? I belive riceburnerex has 8 or 9 PSI of boost with out anything like that, and that gave him 198whp. Thanks alot

~nick~

has this been dyno'd yet? and is this setup with the fuel rail possible to exceed more than 7 psi?

i have run upto 14 psi w/ this system and made 300hp to the ground but it was on a stock 1.8LS non vetec we where just testing the fuel system

i'm in
mike0404noga@hotmail.com

very nice.. now to rob $2900 from a bank or something

interesting...hope this doesn't die like so many other offers

it wont die, because there have already been 2 kits sold.

Thats why my car is apart, so there can be copies made from the original.

are you going to eventually part kits out? or will you ONLY sell this as a complete kit? you say you are building this custom one at a time, does that mean you cna make custom changes based on customer desires?

Can this go on my automatic LX?

just to make an important note, if you put a turbo as big as the T-3 on a little engine like ours, there will be lag till around 3000-3500 rpm, ask some of the others on the site what theyre running, im sure theyll tell you theres a lot of lag. and look at the manifold, it may look clean but look at the primaries, theyre all different lengths, it doesnt look like they tried to make them similar, which is important for best performance. how much R&D time went into this system man?

i would be interested in it too, after some pics and dyno numbers
thanks

Tell me, would you rather have a "Log style" Manifold? The primaries are all equal length, except for the #1 cylinder, which is only about 1/2 inche longer. And that was needed to keep the AC. Also, would you rather have much longer primaries? The longer it is, the less heat it has in the charge, which means slower spooling.

This manifold is made in such a way that the length of the primaries are as short, and as close to equal length as possible.

dont try to trash something that is nicer than the rest of the turbo kits youve ever seen for our cars.

After all, do you think Fiber Images would put a Piece of crap turbo kit on their car? Expecially after spending all that money on carbon fiber?

Think before you speak, and dont trash something based on a picture.

This kit is based on Staffords other kits, which make awesome street power. You want to see the dyno chart for my CRX with his kit on it? my crx went from 88 hp and 89 ft/lbs of torque (to the ground) to 215.1 hp and 176 ft/lbs to the ground.

Heres the numbers for my CRX, this was at 10 psi of boost
THIS IS NOT MY CIVIC, it is an 89 CRX HF

another thing to add, the T3 was not too big for my little 1.6L in my crx, which only had 88 hp to the ground. Since our civics have a 1.7L engine that makes more than 88 hp to the ground, you can probably expect some pretty good numbers from the new kit.

We will know as soon as my piping goes back on my car, so just wait until we have real numbers before you guys start trash talking again.

how much cheaper would it be without the exhaust manifold. Also what is wrong with a log style manifold? Thanks

sounds goood! but im just as anxious as every1 else ... pics? dyno?? when??

The thing that is wrong with a log style manifold is that the exhaust charges do not get to the turbo at the same time. Each cylinder's exhaust gas gets there in differing amounts of times, meaning that 2 cylinders can enter the turbo at the same time.

The log style manifolds are not Horrible, it is just that equal length manifolds give better spooling time, and they just look awesome.