Will this intake fit?
Thread Starter
Registered!!
Joined: Nov 2001
Posts: 391
Likes: 0
From: Toronto, Ontario, Canada
Rep Power: 0 
Will this intake fit?
This intake is for a 2000 lx model. Can I get it to fit an si with a simple cut? I was looking at someones tezo R intake at the D&B meet and he said its from a 2000lx with a cut made. (sorry can't remember your name)
http://cgi.ebay.com/ebaymotors/ws/eb...653791&r=0&t=0
The reason why I'm asking is 'cause it works out to about $65 + shipping from montreal.
http://cgi.ebay.com/ebaymotors/ws/eb...653791&r=0&t=0
The reason why I'm asking is 'cause it works out to about $65 + shipping from montreal.
yes it will fit. just take off ur stock one off. and make sure u got plenty of time at hand
cuz u have to make sure its on tight cuz it will fall off. but it works.
good luck and its pretty cheap.
BID BID BID!
cuz u have to make sure its on tight cuz it will fall off. but it works.
good luck and its pretty cheap.
BID BID BID!
Registered!!
Joined: Feb 2002
Posts: 4,841
Likes: 0
From: Mississauga, Ontario, Canada
Rep Power: 0 
Decamo, it should fit... I know a couple of people who's done it.[IMG]i/expressions/face-icon-small-wink.gif[/IMG] Andoy is the master of that... 
Team RR [IMG]i/expressions/face-icon-small-mad.gif[/IMG]
[IMG]i/expressions/face-icon-small-mad.gif[/IMG]
edit ---- yes, you have to cut it, just enough to fit the filter and that's all folks.
Team RR [IMG]i/expressions/face-icon-small-mad.gif[/IMG]
[IMG]i/expressions/face-icon-small-mad.gif[/IMG] edit ---- yes, you have to cut it, just enough to fit the filter and that's all folks.
no need for cutting. why cut? just kinda angle it a little down. so the hood closes n make sure u buy some zip ties so that it holds the intake in place
any one can install it
just have to be serious bout it. dont do a crap job or else u gonna end up paying for it![IMG]i/expressions/laugh2.gif[/IMG]
any one can install it
just have to be serious bout it. dont do a crap job or else u gonna end up paying for it![IMG]i/expressions/laugh2.gif[/IMG]
Thread Starter
Registered!!
Joined: Nov 2001
Posts: 391
Likes: 0
From: Toronto, Ontario, Canada
Rep Power: 0 Cool, I won it at $38.95 USD. Once I get this on I'll get some pics up. Any tips on how to have it mount securely? I don't want it to bounce off. Also, is it common knowledge that a 2000lx model intake can fit? Or is this a can east secret?
Thread Starter
Registered!!
Joined: Nov 2001
Posts: 391
Likes: 0
From: Toronto, Ontario, Canada
Rep Power: 0 How did you guys get the airflow sensor to fit? The airflow sensor cord is too short to reach. Is there an extension I can get? Or should I just cut the connector off and solder in some wire.
And did you have to cut at the throttle body end of the intake? It doesn't seem to fit that well 'cause its too high and hits the hood.
Help!???????
And did you have to cut at the throttle body end of the intake? It doesn't seem to fit that well 'cause its too high and hits the hood.
Help!???????
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Farticle69
Mechanical Problems/Vehicle Issues and Fix-it Forum
1
Aug 6, 2015 08:02 PM
LorenzoC0395
Mechanical Problems/Vehicle Issues and Fix-it Forum
1
Jul 14, 2015 08:46 PM
NoobyKid
1st - 5th Generation Civic 1973 - 1995
4
Jul 13, 2015 07:53 AM
