Install-Fest at Grey's.
Registered!!
iTrader: (1)
Joined: Aug 2001
Posts: 1,677
Likes: 0
From: Orange County, CA
Rep Power: 0 
Hey ya'll! I'd be down to stop by on Sunday if that's cool with everyone. I know that I no longer have the Civic but I figure it would be cool to see some of you again (lol/2 years) and you could check out my Spec. I PM'd Grey so hopefully it will be all good.
Thread Starter
DIY King
iTrader: (61)
Joined: Apr 2001
Posts: 11,469
Likes: 0
From: Shrewsbury, Massachusetts, US
Rep Power: 419 Originally posted by PbFoot
wish i could go. i have 2 rims that i have to bang out bends from...slight bends, but still.
grey...since youve done it, tell me if you think this wont work. im in the process of buying a set of body/fender hammers and dollies. there is a 2 sided hand dolly in the kit that has a rounded side. im gonna use that instead of manufacturing a curved rod (cause i cant even find a solid metal rod and i have nothing to curve it with...filing would take too long). and i was thinking of banging on it with a 3 or 4 lb sledge. is that too heavy? im gonna have a thick piece of leather under the dolly...like a tool belt type thick leather.
once the weather is a bit warmer i gotta bang out a dent in my left fender also. so the hammers will come in handy more than once.
what do you think?? will it work?
wish i could go. i have 2 rims that i have to bang out bends from...slight bends, but still.
grey...since youve done it, tell me if you think this wont work. im in the process of buying a set of body/fender hammers and dollies. there is a 2 sided hand dolly in the kit that has a rounded side. im gonna use that instead of manufacturing a curved rod (cause i cant even find a solid metal rod and i have nothing to curve it with...filing would take too long). and i was thinking of banging on it with a 3 or 4 lb sledge. is that too heavy? im gonna have a thick piece of leather under the dolly...like a tool belt type thick leather.
once the weather is a bit warmer i gotta bang out a dent in my left fender also. so the hammers will come in handy more than once.
what do you think?? will it work?
Originally posted by RSX XTC
Mehow, i have a set of springs that where on my civic, i had them on for 2 days. and took them off, cuz i got my rsx, i have no use for them, i can bring them down for you to look at, real cheep, hell i might just give them to you..
let me know
Mehow, i have a set of springs that where on my civic, i had them on for 2 days. and took them off, cuz i got my rsx, i have no use for them, i can bring them down for you to look at, real cheep, hell i might just give them to you..
let me know
Thread Starter
DIY King
iTrader: (61)
Joined: Apr 2001
Posts: 11,469
Likes: 0
From: Shrewsbury, Massachusetts, US
Rep Power: 419 Originally posted by DarkCivic
Hey ya'll! I'd be down to stop by on Sunday if that's cool with everyone. I know that I no longer have the Civic but I figure it would be cool to see some of you again (lol/2 years) and you could check out my Spec. I PM'd Grey so hopefully it will be all good.
Hey ya'll! I'd be down to stop by on Sunday if that's cool with everyone. I know that I no longer have the Civic but I figure it would be cool to see some of you again (lol/2 years) and you could check out my Spec. I PM'd Grey so hopefully it will be all good.
Thread Starter
DIY King
iTrader: (61)
Joined: Apr 2001
Posts: 11,469
Likes: 0
From: Shrewsbury, Massachusetts, US
Rep Power: 419 Just to let those of you who don't have my cell phone number and/or address know... PM me and I'll give them to you! Oh yeah, I won't be available after 4:00PM today, so if you've got something you want to ask me over PM or over the phone before tomorrow, then hurry up!
Registered!!
Joined: Jul 2003
Posts: 224
Likes: 0
From: Ask me again in a week
Rep Power: 0 If I can wake up that early I might show for a bit...
Unless TwilightX is there...he scares me...I think he secretly wants to remove my brain and put it in a glass jar...but I've said too much already...
Just kidding Phil!!!
-Black
Unless TwilightX is there...he scares me...I think he secretly wants to remove my brain and put it in a glass jar...but I've said too much already...
Just kidding Phil!!!
-Black
Thread Starter
DIY King
iTrader: (61)
Joined: Apr 2001
Posts: 11,469
Likes: 0
From: Shrewsbury, Massachusetts, US
Rep Power: 419 Originally posted by Mystic3030
Actually black, he told me he DOES want to take something of yours and put it into something of his
Actually black, he told me he DOES want to take something of yours and put it into something of his
Registered!!
iTrader: (1)
Joined: Aug 2001
Posts: 1,677
Likes: 0
From: Orange County, CA
Rep Power: 0 Hey guys- great to hang with all of you again! I had a nifty time. My fiance wants all of you to know that she had a good time too, and appolgizes for being absent towards the end. I'll post up a link for that dyno information in this forum in a little bit. Hopefully we can meet up again soon. I'll be planning a big BBQ this spring and your all invited. I'll keep you posted as to the details.
Joined: Sep 2002
Posts: 3,857
Likes: 0
From: Arizona
Rep Power: 326 Hey guys sorry I missed the meet. This was my first sunday off since I started my new job and I haven't seen my Dad for a while so I went over to his house.
Give me a couple weeks notice and I'll make a day off request, I'd like to meet up with you guys again. Take care.
Give me a couple weeks notice and I'll make a day off request, I'd like to meet up with you guys again. Take care.
Registered!!
Joined: Nov 2003
Posts: 345
Likes: 0
From: Connecticut
Rep Power: 0 I SECOND THE BURGER KING! HEY GUYS, LIKE I SAID, this coming sunday, if you're interested, lvoe to see you there, Im going to make another post on it but:
GET YOUR REAR END'S THERE!
We will be meeting at the Mohegan Sun, again on this SUNDAY 03/14/04 at 12:00pm noon. Let me know if you will be attending and spread the word.
Provided below are the directions to the casino. If you have any questions, let me know. You can call if need be: 860-213-0625
WE WILL BE MEETING ON THE TOP FLOOR OF THE PARKING GARAGE - (Winter Entrance to Casino or the Garage that faces the Hotel)
DIRECTIONS:
Mohegan Sun
1 Mohegan Sun Blvd.
Uncasville, CT 06382
From Providence, R.I. (T.F. Green International Airport)
Take I-95 South to Exit 84N (Route 32 North). Take Route 32 North to I-395 North. Take Exit 79A, (Route 2A) East. Less than 1 mile to Mohegan Sun Boulevard.
From Hartford, CT (Bradley International Airport)
I-91 South to I-84 East to Route 2 East to I-395 South. Take Exit 79A (Route 2A) East. Less than 1 mile to Mohegan Sun Boulevard.
From New York, NY (JFK or Laguardia International Airports)
Take I-95 North to Exit 76/I-395 North. Take Exit 79A (Route 2A) East. Less than 1 mile to Mohegan Sun Boulevard.
From Boston, MA (Logan International Airport)
Take I-90 (Mass Pike) West to I-395 South. Take Exit 79A (Route 2A) East. Less than 1 mile to Mohegan Sun Boulevard.
Also, if it's easier, use www.mapquest.com.
Again, all are welcome, domestics and imports. Bring your girls if you want its open to all. Or ladies, bring your men,lol. There is going to be alot of people here, and photos are being taken, so polish up your rides!
GET YOUR REAR END'S THERE!
We will be meeting at the Mohegan Sun, again on this SUNDAY 03/14/04 at 12:00pm noon. Let me know if you will be attending and spread the word.
Provided below are the directions to the casino. If you have any questions, let me know. You can call if need be: 860-213-0625
WE WILL BE MEETING ON THE TOP FLOOR OF THE PARKING GARAGE - (Winter Entrance to Casino or the Garage that faces the Hotel)
DIRECTIONS:
Mohegan Sun
1 Mohegan Sun Blvd.
Uncasville, CT 06382
From Providence, R.I. (T.F. Green International Airport)
Take I-95 South to Exit 84N (Route 32 North). Take Route 32 North to I-395 North. Take Exit 79A, (Route 2A) East. Less than 1 mile to Mohegan Sun Boulevard.
From Hartford, CT (Bradley International Airport)
I-91 South to I-84 East to Route 2 East to I-395 South. Take Exit 79A (Route 2A) East. Less than 1 mile to Mohegan Sun Boulevard.
From New York, NY (JFK or Laguardia International Airports)
Take I-95 North to Exit 76/I-395 North. Take Exit 79A (Route 2A) East. Less than 1 mile to Mohegan Sun Boulevard.
From Boston, MA (Logan International Airport)
Take I-90 (Mass Pike) West to I-395 South. Take Exit 79A (Route 2A) East. Less than 1 mile to Mohegan Sun Boulevard.
Also, if it's easier, use www.mapquest.com.
Again, all are welcome, domestics and imports. Bring your girls if you want its open to all. Or ladies, bring your men,lol. There is going to be alot of people here, and photos are being taken, so polish up your rides!
Joined: Feb 2002
Posts: 2,142
Likes: 0
From: Boston, Massachusetts, US
Rep Power: 0 Another nice meet. Good to finally meet you and the gf, Dan, and good to meet you too Joe. I ended up f'ing up my wheel at the end of the night, but oh well. 
Thread Starter
DIY King
iTrader: (61)
Joined: Apr 2001
Posts: 11,469
Likes: 0
From: Shrewsbury, Massachusetts, US
Rep Power: 419 Originally posted by Krepoort
Another nice meet. Good to finally meet you and the gf, Dan, and good to meet you too Joe. I ended up f'ing up my wheel at the end of the night, but oh well.
Another nice meet. Good to finally meet you and the gf, Dan, and good to meet you too Joe. I ended up f'ing up my wheel at the end of the night, but oh well.
Thread Starter
DIY King
iTrader: (61)
Joined: Apr 2001
Posts: 11,469
Likes: 0
From: Shrewsbury, Massachusetts, US
Rep Power: 419 Originally posted by Havok2K1
Another successful meet....
Boy did I shock Grey when I rolled up in my new 2K4....
Another successful meet....
Boy did I shock Grey when I rolled up in my new 2K4....
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
