Bought Injen Intake Need Help..
Thread Starter
Diamond Member
Joined: Feb 2005
Posts: 1,278
Likes: 0
From: So Cal
Rep Power: 0 
Bought Injen Intake Need Help..
Hey guys I just bought the injen cai intake off Vtechgrl. But it doesn't have any install manaul. Can someone tell me what I need to do to install it? I was using the AEM CAI DIY for a refference but came up on a problem. The AEM install DIY says I need to change the stock bracket of the car to the one AEM supplies. All I got from vtechgrl was the intake, no brackets. Can someone tell me if I'm missing something? Heres a pic of what I got...
Joined: Oct 2002
Posts: 4,248
Likes: 2
From: Rockville, Maryland
Rep Power: 331 
you have the lower pipe on upside down, that thing on the side is a bracket, it bolts to a stock airbox mounting point over the transmission.
Superior Evolutionary Element Destined-factor
iTrader: (10)
Joined: Apr 2004
Posts: 1,290
Likes: 0
From: Toronto
Rep Power: 0 well its gonna look like this from the top:
once you go the top pipe in, take the bumper off if you havent already. through the splashguard and the frame of the car you have to shimmy the lower piping through there so that it meets the other pipe. make sure the placement is correct. where both pipes meet it has to look straight and not bent when you tighten it. for that bracket near the filter, theres a wire thats screwed onto the frame, undo the screw and place the vibramount and screw the intake bracket to it, thats where the pipe is gonna hold. once you're sure of the fitment, tighten everything. place the filter on. to do all of this you might need to take the battery out to get the pipe through. hope that all made sense.
once you go the top pipe in, take the bumper off if you havent already. through the splashguard and the frame of the car you have to shimmy the lower piping through there so that it meets the other pipe. make sure the placement is correct. where both pipes meet it has to look straight and not bent when you tighten it. for that bracket near the filter, theres a wire thats screwed onto the frame, undo the screw and place the vibramount and screw the intake bracket to it, thats where the pipe is gonna hold. once you're sure of the fitment, tighten everything. place the filter on. to do all of this you might need to take the battery out to get the pipe through. hope that all made sense.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
