dc5 muffler
Thread Starter
TeLLy is my daddy
iTrader: (6)
Joined: Sep 2003
Posts: 872
Likes: 0
From: Richmond
Rep Power: 0 
dc5 muffler
would any muffler for the dc5 fit our civics?? i'm talking about just the muffler...
but if someone knows, does the dc5 mid pipe also fit the civic (sedan)??
i want to get the mugen racing exhaust system
http://www.kingmotorsports.com/product.asp?product=202
does anyone know if this would fit the sedan? maybe even close??? because this is the same exhaust on the 2.0i-vtec 04 civic sedan in malaysia
does anyone know if this would fit???
but if someone knows, does the dc5 mid pipe also fit the civic (sedan)??
i want to get the mugen racing exhaust system
http://www.kingmotorsports.com/product.asp?product=202
does anyone know if this would fit the sedan? maybe even close??? because this is the same exhaust on the 2.0i-vtec 04 civic sedan in malaysia
does anyone know if this would fit???
Search and Learn
iTrader: (34)
Joined: May 2002
Posts: 14,004
Likes: 0
From: 909, Socal
Rep Power: 432
Originally Posted by civictuner
ive been wonderin too...
i think for the muff u gotta get custom hangers and gotta modify the pipes cause they dont line up
as for mid-pipe i think thats a direct bolt on
i think for the muff u gotta get custom hangers and gotta modify the pipes cause they dont line up
as for mid-pipe i think thats a direct bolt on
Far as muffler section goes, they will not bolt on correctly.
Will stick out about 3-4 inches from rear bumper.
You will have to modify to make it fit perfectly.
Banned
Joined: Jun 2004
Posts: 322
Likes: 0
From: Puhi, Kauai Hawaii
Rep Power: 0 
Originally Posted by civicvtec1ps
No, midpipe is not direct bolt on.
Far as muffler section goes, they will not bolt on correctly.
Will stick out about 3-4 inches from rear bumper.
You will have to modify to make it fit perfectly.
Far as muffler section goes, they will not bolt on correctly.
Will stick out about 3-4 inches from rear bumper.
You will have to modify to make it fit perfectly.
Thread Starter
TeLLy is my daddy
iTrader: (6)
Joined: Sep 2003
Posts: 872
Likes: 0
From: Richmond
Rep Power: 0 haha, yea, well i really like the muffler....too bad u can't buy it just for the muffler itself, u have to buy the entire catback....i was thinking i'm gonna get the spoon n1 exhaust (dc5) and get it custom piped from head to toe....
Banned
Joined: Jun 2004
Posts: 322
Likes: 0
From: Puhi, Kauai Hawaii
Rep Power: 0
Originally Posted by gtracing
haha, yea, well i really like the muffler....too bad u can't buy it just for the muffler itself, u have to buy the entire catback....i was thinking i'm gonna get the spoon n1 exhaust (dc5) and get it custom piped from head to toe....
jhpusa sells the N1 for $350 heres a link: http://www.jhpusa.com/catalog/produc...bc8e703c1315c2
opakracing too umm.. the street version link..price is $678.00 is: http://www.opakracing.com/Catalog/EXHAUST%20INDEX.htm and click and the street version muff
and the N1 too link is...price is $452.00: http://www.opakracing.com/Catalog/Pr...ENCER%20N1.htm
after u get these this parts u can get the Spoon decals to complete ur Spoon ride like i did hers a link: http://www.opakracing.com/Catalog/Pr...s/STICKERS.htm
its expensive but hell it is tuned for power and its pure japanesebut if u get the N1 u can get the silencer for it hers a link...price is $65.00: http://www.opakracing.com/Catalog/Pr...20SILENCER.htm
also if u want u can get the mid-pipe...price is $412.00: http://www.opakracing.com/Catalog/Pr...T%20PIPE-B.htm
Last edited by civictuner; Oct 31, 2004 at 09:22 PM.
My 5zigen exhaust is for an RSX type S. It had to be modified with new hangers, it had to be cut, and lenthened. The resonator and actual muffler are the same. I only did this because at the time I was looking for an exhaust system there was nothing local. The shop did the retrofit for $700 canadian which isn't that bad.
Banned
Joined: Jun 2004
Posts: 322
Likes: 0
From: Puhi, Kauai Hawaii
Rep Power: 0
Originally Posted by zachgeyer
will spoon stuff even fit are cars
ask for EP3 parts ..all the parts are direct bolt in
Yes, it's an Acura EL
iTrader: (23)
Joined: Dec 2002
Posts: 8,248
Likes: 0
From: 416-905, Ontario, Canada
Rep Power: 368 
I didn't know Spoon made a titanium shift **** for automatics. In fact, I didn't know they made ANYTHING specific for autos....ah wait, THERE it is.
Last edited by TeLLy; Nov 1, 2004 at 12:11 PM.
i dont think the strut tower bars from spoon will fit our cars, all the little miscelaneous dress up things will but as far as performance, i think maybe only the rear lower tie bar and the muffler. thats if ur willing to buy a spoon n1 and have someone cut it to fit.
Search and Learn
iTrader: (34)
Joined: May 2002
Posts: 14,004
Likes: 0
From: 909, Socal
Rep Power: 432
Originally Posted by macH
i dont think the strut tower bars from spoon will fit our cars, all the little miscelaneous dress up things will but as far as performance, i think maybe only the rear lower tie bar and the muffler. thats if ur willing to buy a spoon n1 and have someone cut it to fit.
Low front tie bar, rear low tie bar also fits.
It will need to be cut and new portions of piping will need to be added. The hangers will need to be modified. I am not sure of everything the shop did to get it to fit but they worked it out. If your going to spend $1300 on the exhaust system just to have an exhaust shop cut it up and make it fit you are wasting your money. The $700 I spent included the 5zigen Fireball exhaust system plus labour and materials.
Registered!!
Joined: Oct 2002
Posts: 127
Likes: 0
From: Australia
Rep Power: 0
Originally Posted by civicvtec1ps
Rear sturt bar only fits, not front upper strut bar.
Low front tie bar, rear low tie bar also fits.
Low front tie bar, rear low tie bar also fits.
Id like to know why you think this, I have both the front and rear spoon strut bars on my sedan
Search and Learn
iTrader: (34)
Joined: May 2002
Posts: 14,004
Likes: 0
From: 909, Socal
Rep Power: 432
Originally Posted by GLi4dr
Id like to know why you think this, I have both the front and rear spoon strut bars on my sedan
I was thinking EP3. Need relocation on brake fluid resevoir for strut bar clearance.
No big deal.
Neuspeed is better anyways.
Back to the topic.
Thread Starter
TeLLy is my daddy
iTrader: (6)
Joined: Sep 2003
Posts: 872
Likes: 0
From: Richmond
Rep Power: 0 ^^j's racing is the best!!
but yea..anyways
i'm not specifically buying that one...the 1300 mugen one...i was actually looking at the spoon street one..the one that looks oem...i'm gonna get just the muffler, then get it custom piped from header to muffler....with high flow cat etc...but IF the dc5 one does infact fit..i'd definitely will try to save to get that exhaust...and oh, btw, it's not 1300, mugen stuff is well overpriced...i can get it cheaper...
but yea..anyways
i'm not specifically buying that one...the 1300 mugen one...i was actually looking at the spoon street one..the one that looks oem...i'm gonna get just the muffler, then get it custom piped from header to muffler....with high flow cat etc...but IF the dc5 one does infact fit..i'd definitely will try to save to get that exhaust...and oh, btw, it's not 1300, mugen stuff is well overpriced...i can get it cheaper...
Thread Starter
TeLLy is my daddy
iTrader: (6)
Joined: Sep 2003
Posts: 872
Likes: 0
From: Richmond
Rep Power: 0 haha....rear upper bar....i'll see if i can buy u one for christmas!!!
underbrace...telly, ur slammed lower than me..and i bottom out my underbrace all the time..i don't suggest u get one....get a tie bar instead, less area to hit...
pics of my gf? um....i'll see what i can do....hahaha
underbrace...telly, ur slammed lower than me..and i bottom out my underbrace all the time..i don't suggest u get one....get a tie bar instead, less area to hit...
pics of my gf? um....i'll see what i can do....hahaha
Yes, it's an Acura EL
iTrader: (23)
Joined: Dec 2002
Posts: 8,248
Likes: 0
From: 416-905, Ontario, Canada
Rep Power: 368 hee hee....we can trade gf pics.
So you bottom out all the time eh? Shiat....I was hoping to stiffen up with an X or Tanabe....but then again the underground parking entrance to my place is pretty horrid...
So you bottom out all the time eh? Shiat....I was hoping to stiffen up with an X or Tanabe....but then again the underground parking entrance to my place is pretty horrid...
Thread Starter
TeLLy is my daddy
iTrader: (6)
Joined: Sep 2003
Posts: 872
Likes: 0
From: Richmond
Rep Power: 0 yea, i wouldn't suggest it....is it like that one time we went to that korean bar in the afternoon..and everyone was bottoming out going down into the parkade??? trust me man, don't get it if your SLAMMED! and yes, we can trade gf pics...
Yes, it's an Acura EL
iTrader: (23)
Joined: Dec 2002
Posts: 8,248
Likes: 0
From: 416-905, Ontario, Canada
Rep Power: 368 He he.....I'll see you on MSN later then....ha ha.
Hmmm....well, a front lower tie might have to suffice. Frankly I'm thinking I have to raise the car up a bit next season anyway though (bigger+wider rims) so maybe I'll be able to squeeze a Tanabe in there. Definitely gotta get AT LEAST my rear upper back though....it feels a little looser back there.
Hmmm....well, a front lower tie might have to suffice. Frankly I'm thinking I have to raise the car up a bit next season anyway though (bigger+wider rims) so maybe I'll be able to squeeze a Tanabe in there. Definitely gotta get AT LEAST my rear upper back though....it feels a little looser back there.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
jdawgzcivic
Engine
17
Feb 1, 2020 04:16 PM
Dave Brabant
6th Generation Civic 1996 - 2000
20
Oct 6, 2015 12:44 AM
Nalmonte
Mechanical Problems/Vehicle Issues and Fix-it Forum
3
Aug 1, 2015 07:57 AM
