Any peeps from the Denver CO, area?
Originally posted by BlueRevs
yeah get the RSX S sway bar, it will help with your turn more then a front will, front wheel drive cars just want to drag that back end if it could like a dog whiping its ***, At the event at the world area i was softening my fronts and stiffining the rears as much as possible, and each time i would gain more traction and hey while your on the subject http://www.7thgencivic.com/forums/sh...91#post1756091 this is the cheapest i have ever seen this bar, i would not pass it up if your wanting one. yeah and Azenis are the best investment you can make. any performance tire with ratings like that will cut 6 seconds or way more on anyone.
yeah get the RSX S sway bar, it will help with your turn more then a front will, front wheel drive cars just want to drag that back end if it could like a dog whiping its ***, At the event at the world area i was softening my fronts and stiffining the rears as much as possible, and each time i would gain more traction and hey while your on the subject http://www.7thgencivic.com/forums/sh...91#post1756091 this is the cheapest i have ever seen this bar, i would not pass it up if your wanting one. yeah and Azenis are the best investment you can make. any performance tire with ratings like that will cut 6 seconds or way more on anyone.
Registered!!
iTrader: (1)
Joined: Sep 2002
Posts: 718
Likes: 0
From: Colorado Springs, CO
Rep Power: 0 
i wish i had adjustable sway bars, but i just have the RSX R bar 22mm. i was adjusting my konis, i have to keep telling my self to keep the fronts softer, because i will forget and just think that stiff everywhwere is the best, every event my set up is different and i still haven't found the exact way i like it set up.
Registered!!
iTrader: (1)
Joined: Sep 2002
Posts: 718
Likes: 0
From: Colorado Springs, CO
Rep Power: 0 
I think im coming out here in March, like the third week fro spring break, not sure how much ill be around though. Ill let you know, ill check to see if there is an event too. I know there is one when i get back to KS so im definitly hittin that up
OK...so the last event was postponed until Feb. 22nd....BUMMER!!!
ROB....YOU'D BETTER SHOW UP FOR THIS ONE!!!!! NO EXCUSES!!! lol
Greg....any idea when you'll be out?!?!?
The new Hayame's should prove VERY effective...well, better than the friggin' Neuspeed's/Stock shox....lol.
1 FUGGIN' WEEK...that's all the stock shox lasted...1 FUGGIN' WEEK!!!
Anybody wanna buy some SLIGHTLY used Neuspeed Race springs? lol
*Inner monolouge* That's ok, the sticker won't have to be removed...I'm gettin' the Neuspeed Front Upper Strut bar with the Hayame's so...yeah...this should be FUN!!!
ROB....YOU'D BETTER SHOW UP FOR THIS ONE!!!!! NO EXCUSES!!! lol
Greg....any idea when you'll be out?!?!?
The new Hayame's should prove VERY effective...well, better than the friggin' Neuspeed's/Stock shox....lol.
1 FUGGIN' WEEK...that's all the stock shox lasted...1 FUGGIN' WEEK!!!
Anybody wanna buy some SLIGHTLY used Neuspeed Race springs? lol
*Inner monolouge* That's ok, the sticker won't have to be removed...I'm gettin' the Neuspeed Front Upper Strut bar with the Hayame's so...yeah...this should be FUN!!!
Registered!!
iTrader: (1)
Joined: Sep 2002
Posts: 718
Likes: 0
From: Colorado Springs, CO
Rep Power: 0 
lol, man that blows, one week, jees, now you should do it yourself, especially to cut down on price, Yeah i wont be out in the springs till march cause i just got back from a 6 day conference in San Diego. Yeah i know it sucked, 68 degree weather all week. anyway yeah sucks about the shocks man
OK...ROB....mmm2donuts....I KNOW YOU'RE OUT THERE!!!!!
YOU HAVE TO REGISTER FOR THE Feb. 22nd EVENT!!!! I'm NOT going to be the ONLY 7thgen OUT THERE!!!!!!!!!!!!
ROB...CAN YOU HEAR ME?!?!?!? lol
Greg...yeah I just aquired a friend that has a LOT of tools that I don't, he's going to the DADC (Denver Automotive and Deisel College) and he said he'd help me for free...well lunch and some pics for a project for his school, so I'm all about it!!! WOO HOO
HOWEVER...rob @ robbearracing doesn't have the Hayame's in yet, so unfortunately they won't be on for the race sunday..BUMMER...I'll be runnin' the Neuspeeds w/ FOCKED UP SHOX!!! Oh well... I'll live..I just hope the car will, lol.
YOU HAVE TO REGISTER FOR THE Feb. 22nd EVENT!!!! I'm NOT going to be the ONLY 7thgen OUT THERE!!!!!!!!!!!!
ROB...CAN YOU HEAR ME?!?!?!? lol
Greg...yeah I just aquired a friend that has a LOT of tools that I don't, he's going to the DADC (Denver Automotive and Deisel College) and he said he'd help me for free...well lunch and some pics for a project for his school, so I'm all about it!!! WOO HOO
HOWEVER...rob @ robbearracing doesn't have the Hayame's in yet, so unfortunately they won't be on for the race sunday..BUMMER...I'll be runnin' the Neuspeeds w/ FOCKED UP SHOX!!! Oh well... I'll live..I just hope the car will, lol.
so whats up? all you denver people need to fill me in on a little info here, i need to get 20% all around where can i get this done at?? i haven't been able to find a place that will do it(or admit to it or something crazy like that) do i need some seceret code word or the like?? im in boulder right now but will drive to denver or csprings to get it done... a little help would be great!
Registered!!
iTrader: (1)
Joined: Sep 2002
Posts: 718
Likes: 0
From: Colorado Springs, CO
Rep Power: 0 
Hey Jason are you going to do the event on the 21st of March? It says its a tentative schedule date, i will be able to make that one, ill be there for sure at least right now anyway
Registered!!
iTrader: (1)
Joined: Sep 2002
Posts: 718
Likes: 0
From: Colorado Springs, CO
Rep Power: 0 
I got mine done in motorcity at drive in autosound, but i had a connection for a 100 dollars off, so it only cost me 100 bones, they did a great job, but they are pricey. if i can i think i may be able to hook you up with one of my friends buddies, i saw the work he did on his car and i was clean, but i would have to get back to you with more details on it if you want some guy do a good job for less. but again im not sure he could do it.
Originally posted by BlueRevs
Hey Jason are you going to do the event on the 21st of March? It says its a tentative schedule date, i will be able to make that one, ill be there for sure at least right now anyway
Hey Jason are you going to do the event on the 21st of March? It says its a tentative schedule date, i will be able to make that one, ill be there for sure at least right now anyway
Affirmative Ghost Rider....lol....DUH...I'm ADDICTED!!!
However, as you've prolly seen....I didn't do so well at the last event...reason you ask....MUAHAHAHA
1) FOCKED UP REAR SHOX ARE USELESS!!!
2) Khumo Ecsta Supra's, while GREAT daily tires...SUCK as race tires.
3) I accidently Armor-alled my steering wheel, so it was REALLY hard to keep my hands on the wheel...
Hopefully the Hayame's will be on intime for the next event....as well as the new AZENIS!!! WITH the Neuspeed Upper Front Strut Bar (Cheap thanks to Rob @ Robearracing.com)
Then we'll see who kick's who's ***!!! lol j/k Greg...you'll still beat me.
Hey preliasco....what's your name? I hate typing screen names, and besides, we're all cool here. I'm Jason, BlueRevs is Greg, mmm2donuts is Rob....there's a few other COins but they don't post in this thread...losers, lol, j/k.
Click my sig for links to CO AutoX news/events and the bigger pic for a link to THIS thread.
The best place to get the tint, IMO, is on Quincy & Wadsworth here in Littleton. They did my 5% LIMO tint for $200...under the table, CASH ONLY...and keep in on the DL...they could get busted for that....lol...as I post it on the internet, lol
Anymore questions? usolympicdrinker on AIM, YIM, MSNIM
WELCOME!!!!
the name is Ian, nice to meet you lads, thanks for the info there, ive sent a little PM your direction hope thats good...i guess a little intro is in order, i bought my 2001ex about 8-9months ago and have been lurking around here for a wee bit learning about all this stuff, have nothing done to my car(cept some tailights and rims that were on the car when purchased) and hope to get some stuff going with it here pretty soon, but completeing my vision might take awhile since i am a poor fool, so yea thats about it, ill be around...any other suggestions are welcomed too
Originally posted by BlueRevs
So are the Haymens adjustable? Do you have to modify the suspension like Koni?
So are the Haymens adjustable? Do you have to modify the suspension like Koni?
The Hayame's are a self-contained coilover...it's a shock/coil combo. The damper is NOT adjustable, however...the ride height is, and the spring pre-load is, making it stiffer/softer to a certain degree. SO in a sense...yes they are adjustable, but not like the Koni's. lol
I really wouldn't know...I DON'T FRIGGIN' HAVE THEM YET...[cough]been waiting two weeks[/cough] lol.
Registered!!
iTrader: (1)
Joined: Nov 2003
Posts: 900
Likes: 0
From: Colorado Springs, CO
Rep Power: 0 
So fatty you got the Hayames? Cool, me too, you like em? Whatcha all doin in Denver? I would like to come up but my wife is like 9+ months pregnant so she could pop anytime now, but whats up?
Originally posted by Crackhead79
So fatty you got the Hayames? Cool, me too, you like em? Whatcha all doin in Denver? I would like to come up but my wife is like 9+ months pregnant so she could pop anytime now, but whats up?
So fatty you got the Hayames? Cool, me too, you like em? Whatcha all doin in Denver? I would like to come up but my wife is like 9+ months pregnant so she could pop anytime now, but whats up?
YUP!!! I have ORDERED them, however...rob @ robearracing.com hasn't shipped them to me yet...don't know why, I ordered/payed for them TWO WEEKS AGO...but oh well, they'll be here when they get here, lol.
Not much happenin' in D-town, same ole ****..different day, lol. I was just down there for the AutoX event @ the world arena...WHERE WERE YOU??? lol
CONGRATS ON THE KID!!! I just got 1/2 custody of my 2.5 yr. old daughter!!! TRUST ME YOU'll LOVE IT!!! I DO!! lol
So...yeah, I hope everything goes ok...good luck!!
Registered!!
iTrader: (1)
Joined: Nov 2003
Posts: 900
Likes: 0
From: Colorado Springs, CO
Rep Power: 0 
oh, I know- I already have a 9 year old. Its rough at times just cause I feel like a bad dad, but I'm trying-
Besides, I can't do AutoX right now, still tuning my hayames and getting my fenders rolled, still rubbing with my camber kit in. Check out the Mugen rear bar, the cars really stiff now-nice
Besides, I can't do AutoX right now, still tuning my hayames and getting my fenders rolled, still rubbing with my camber kit in. Check out the Mugen rear bar, the cars really stiff now-nice


