1999 Acura CL 1259 Code
Thread Starter
Registered!!
Joined: Sep 2012
Posts: 1
Likes: 0
From: Texas
Rep Power: 0 
1999 Acura CL 1259 Code I have a 1999 2.3L Acura CL, my daughter blew out the head gasket and ruined the head and the block. I found another motor off a 2000 Honda Accord, the motor was an exact replacement. I just had to swap out the Inake manifold and the exhaust manifold. All the wiring was hooked back up to the normal connections, I even took the old VTEC selenoid housing off the old motor and put it on the replacement motor. The screen was clean and fresh oil was put into the replacement motor. I turn the ignition on for about 7 minutes before I started the car, the car started right away with no problem. The car runs great, no hesistation, no misfiring, no RPM problem, nothing at all. But the CEL came on, got my code reader and it came up with the P1259 code. Any suggestions from anyone!
If you think a good mechanic is expensive, try hiring a bad one
Joined: Dec 2011
Posts: 32,017
Likes: 256
From: Midwest. Aiming about mid-chest
Rep Power: 519 
Re: 1999 Acura CL 1259 Code
Check this answer:
https://www.civicforums.com/forums/3...ml#post4618312
https://www.civicforums.com/forums/3...ml#post4618312
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Wankenstein
Mechanical Problems/Vehicle Issues and Fix-it Forum
8
Jul 12, 2015 11:54 AM
cgavin1
Mechanical Problems/Vehicle Issues and Fix-it Forum
3
Jul 7, 2015 07:10 AM
