Rep Power: 0

The drivers side power lock wasn't working for the past couple of months, so over the weekend I finally got around to replacing the actuator. I had the same issue a few yeas ago on the passengers side. Issue here is that after replacing it I made sure to test it before putting everything back & it was fine. After putting the door panel back & connecting everything I tested it at least a dozen times & everything was working as it should. So the next day it was fine when I used to key less entry in the morning, but later in the day it stopped working again. I'm wondering if anyone has any suggestions on what may be the issue, since I doubt the new actuator will burnout In just one day. The passengers side is working as it should, so the issue is strictly on the drivers side. I'm looking for suggestions before I take everything apart again. THX

 
Rep Power: 308

Intermittent connection in the door harness... or elsewhere.

 
Rep Power: 0

hope it's just a loose connection somewhere, I'll take another look into it this weekend.