Rep Power: 0

Ok I have been searching for about 2 hours to the answer. I have a 2001 civic sedan lx. I was swaping gagues out of a 2003 lx into my car. I followed the write-up exactly. They did not work. I figure they were no good because the salvage yard didnt even know the miles on them. Any way went to swap the stock ones back in. Well didnt write down what wires went where in the plugs. I think I got everything corret from the manual, not sure though. If someone has a diagram on how they should be hooked up please post it. I ask for this because my stock gagues do nothing now at all. No lights on, and the lights for the ac controls dont work. I have checked all fueses and replaced ones that I seen were for gauges. I am lost, I am hoping I didnt fry something!

Right now I am mainly wanting to get the stock ones (the 2001) wired back in. I need the pinout for that. I want to make sure it is working fine beacuse that is the main step I forgot was to disconect the battery, I dont know why I am very good about doing that I am just to tired when I started and wasnt paying attention. I had quite a few wires pulled out of the blue plug before I even relized I didnt unplug the battery. Do you think I fried something?

Where do i need to start trouble shooting. I have checked for 4 voltages that is says should be a different wires on the plugs and have them all and the correct volts. But I dont know where to go from there.

 
Rep Power: 353

this thread is all the info you need.

https://www.civicforums.com/forums/1...faq-video.html