Rep Power: 0

i m trying to install my 05 rsx seats into a 03 ex, but it seems only maybe 2 bolt hold will line up. I know ppls will 02-04 rsx seats have 3 hold lined up. Can somebody tell me which hold doesn't line up.

thx for the help.

 
Rep Power: 0

mine like that.....only 2 holes lined up, thats mean 2 front bolts lined up only.....then you gotta trim the holes bigger to lined up the holes for the 2 at rear......

is ur 05 leather or cloth?

 
Rep Power: 0

tired bolting down the front 2 bolts and sit on it. the rear outside hold still needs around half in before the bolt can get in. Any other installation tips?

 
Rep Power: 0

mine is leather

 
Rep Power: 0

i told u already, just trim the rail holes bigger.....then make it fit..thats only way if you want them fit on ur car.....

 
Rep Power: 346

nice!! How much? I just got my si seats and they just bolt on......

 
Rep Power: 346

Hondaluver did this to my seats but it didnt need it. But rsx seats are different......

 
Rep Power: 0

i wonder how different is the 05s and below

 
Rep Power: 0

yes, i understand that will be the easier/quickest way, but will the seats be level? that is the thing i m afraid of.

 
Rep Power: 0

yeh. u see the pic, he's trimming the rail hole......to make it bigger (thats what i did to my rsx-s leather seats, so you can bolt up to ur car.

 
Rep Power: 0

yea man, I got rsx seats too and u need to get the back left one bigger inorder to fit properly, my driver side I got 4 out of 4 bolts, and the passenger I didnt even bother with it so I left it 3 out of 4

 
Rep Power: 0

how much did you guys get thos saets for? the RSX seats and the SI seats?

 
Rep Power: 0

linky for peps who want rsx-s seats in S. Cali......this guy sellin $500 less than 2700 miles....
http://forums.clubrsx.com/showthread...rsx+cloth+seat

i got mine $400. about 10k miles on them.......

 
Rep Power: 0

thx for the input guys, for some reason, my pass side only got the front 2 lined up. I haven't try the driver side yet. I guess i'll dremel the holes bigger than.

 
Rep Power: 0

well, i tried to file the bolt hole down but is gonna take forever, so i'll use my friend's dremel tool tomorrow.

Q !

should i leave the front 2 hole alone and mess with the rear only? or should i enlarge the front too. The reason behind this is, when the front bolts are bolted down tight, the rear bolt holes would not sit flat on the floor.

 
Rep Power: 0

just leave the front 2 hole alone, trim off the rear only.......for the 2 front, just hands tighten them half way. so you can do some adjusting to the rear.......so u will know how big u needed to trim off........

 
Rep Power: 273

Good luck with the install.

 
Rep Power: 0

well, got my 05 type S seats installed. Had to dremel the rear 2 hole to get it fit. The seats sit higher than stock for some reason, and i need to get some spacer to get it level. will get pics soon.