Taking off Mirrors...

Thread Tools

Search this Thread

May 26, 2003

Sivion

Thread Starter

Resident Tough Guy

iTrader: (2)

Joined: Oct 2002

Posts: 437

Likes: 0

From: Riverside, California, US

Rep Power: 0

Sivion is an unknown quantity at this point

Taking off Mirrors...

I want to change out my mirrors. However I do not know how to take off the plastic piece on the inside. I looked at it and tried. I do not want to break anything tho. Can someone maybe explain it to me or maybe post pics?

May 26, 2003

importz2k1

Hey! Look At Me!! I'm a Supporting Member!!

iTrader: (7)

Joined: May 2002

Posts: 1,629

Likes: 0

From: Atlanta, Georgia

Rep Power: 0

importz2k1 is an unknown quantity at this point

Put a little elbow grease in it!!!!
It just pops out. Pull on it, only 3 clips hold it on.

May 26, 2003

OsOBooSTeD

OsOBaNNeD

iTrader: (5)

Joined: Mar 2002

Posts: 3,959

Likes: 0

Rep Power: 0

OsOBooSTeD is an unknown quantity at this point

just pull that bish..... make sure the door is open ... lol .. pull it from the sides... it pops right off.... then there are 3 bolts that hold the mirror on.

May 26, 2003

OsOBooSTeD

OsOBaNNeD

iTrader: (5)

Joined: Mar 2002

Posts: 3,959

Likes: 0

Rep Power: 0

just pull that bish..... make sure the door is open ... lol .. pull it from the sides... it pops right off.... then there are 3 bolts that hold the mirror on.

May 26, 2003

robbclark1

Retired suspension supermod.

Hey! Look At Me!! I'm a Supporting Member!!

iTrader: (8)

Joined: Aug 2001

Posts: 10,857

Likes: 0

From: Gaithersburg, MD

Rep Power: 412

YEah just pull on it. Its clips are held in tightly. Then there are screws inside that hold the mirror on.

May 27, 2003

synikal

Registered!!

Joined: Nov 2002

Posts: 460

Likes: 0

From: SoCal

Rep Power: 0

synikal is an unknown quantity at this point

^^^^^^what they alllllllllll said.

May 27, 2003

Sivion

Thread Starter

Resident Tough Guy

iTrader: (2)

Joined: Oct 2002

Posts: 437

Likes: 0

From: Riverside, California, US

Rep Power: 0

Thanks

OK I got it off. Now to figure out how to take the inside of the door off so that I can run the turn signal wiring.

May 27, 2003

CarbonFly

Tell me what you don't like about yourself....

Hey! Look At Me!! I'm a Supporting Member!!

iTrader: (12)

Joined: Oct 2002

Posts: 12,576

Likes: 0

From: Columbia, SC, USA

Rep Power: 413

Oh geez.......it would have been so much easier if you would have removed the door panel first, then that inside plastic piece would have come out so much easier.