Alarm DIY??
Thread Starter
Registered!!
Joined: Mar 2003
Posts: 309
Likes: 0
From: orange county CA
Rep Power: 0 
Alarm DIY??
I seached and only can find some wiring diagram. I am totoally new to these.
After reading some other post and tips, I decided not to have someone else to install the alarm. Or it is too hard for a DIY?
Is there a DIY this??
After reading some other post and tips, I decided not to have someone else to install the alarm. Or it is too hard for a DIY?
Is there a DIY this??
Registered!!
Joined: May 2004
Posts: 734
Likes: 0
From: 626
Rep Power: 0 I wouldnt attempt installing an alarm myself 
However, since Im buying the OEM Honda security system for $120 with installation instructions and wiring diagram, I will install it myself.
Of course, I will be adding a back-up battery, same color wiring, and a second siren for extra precationary measure.
However, since Im buying the OEM Honda security system for $120 with installation instructions and wiring diagram, I will install it myself.
Of course, I will be adding a back-up battery, same color wiring, and a second siren for extra precationary measure.
Registered!!
Joined: May 2004
Posts: 734
Likes: 0
From: 626
Rep Power: 0
Originally Posted by zen_master
yo, tell me how to do em!!! 
Im still in the pre-install DIY documentation and planning for those extra stuff
If I were to do a simple OEM Honda security system, it would have been really easy. Although, it could still be easy even with the extra stuff (I hope!!)
Im reading the PDF install file for GX/HX/LX/EX application and it appears to be a plug-n-play. With the small exception of drilling a small hole to insert the LED. Other than that, theres not even any splicing of some sort.
Splicing should occur when those extra stuff will be installed.
Last edited by 518; Jul 16, 2004 at 04:30 PM.
I can resist everything except temptation.
Hey! Look At Me!! I'm a Supporting Member!!
Joined: Aug 2003
Posts: 2,311
Likes: 0
From: Waldorf, MD
Rep Power: 299 From what I've been told it is not that hard to do as long as you have some paitence and a good wiring diagram of your car. (where to buy or get I do not know) I am about to do mine myself installing a DEI Viper 791XV
Link . I will try and do a DIY. IF you just follow instructions and have paitence it should not be that hard. Although if you have no electrical knowledge I would recommend getting some or letting someone who does have some help you or just do it for you (ie a shop).
Link . I will try and do a DIY. IF you just follow instructions and have paitence it should not be that hard. Although if you have no electrical knowledge I would recommend getting some or letting someone who does have some help you or just do it for you (ie a shop).
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
frank_kleng
7th Generation Civic 2001 - 2005
4
Sep 29, 2015 10:55 PM
MamaBear2015
6th Generation Civic 1996 - 2000
4
Sep 24, 2015 11:34 AM
