Rep Power: 0

I got a oem jdm fog light kit off of ebay for my 99 civic ex. Has anyone ever seen a install manual for these lights. none came with the parts or have i been able to find one online. thanks for the help.

 
Rep Power: 230

Do you have a link to the auction so we can see what did come with it?

 
Rep Power: 0

http://cgi.ebay.com/ebaymotors/99-00...ayphotohosting

the link above will take you to the ebay page of the same pair of lights I bought.

 
Rep Power: 230

I'm going to assume you atleast know how to put the fog lights into the front bumper. I take it that you are having trouble with the electrical part of it.

 
Rep Power: 0

Ya i got the lights in but wasnt able to take a look around for the route the wires took. im sure i could find it because the car is still wired cuz my old fogs were just ripped out. Do you know the exact route that the wires go or if there are factory wire harness already there? thanks for the help!

 
Rep Power: 0

Has anyone re-wired a pair of fog lights and had issues with the stock wires and the ones that you bought. I am having a problem with the connectors, they are the same male side. any thoughts or suggestions?

 
Rep Power: 0

Either hard wire them or get new connectors. Just make sure any splices are water tight. If you extend the wires make sure you stick with the same guage wire.

 
Rep Power: 230

There is no "route" that is predetermined for fog lights. I mean some cars have the factory harness but only if your car came with fog lights stock. I would just look for a route that hides the wire pretty good. I don't know what state you live in, but in order to pass inspection in PA your fog lights have to turn off when you turn your high beams on. If you don't know find out. Other wise you just run a power wire from the battery and to the switch and the other wire to the fog lights. Lemme know if you need anything else.

 
Rep Power: 0

I finally got them working. what i ended up doing was splicing the end coming from my car and the one going to my car. then they still didnt work because the ground wire coming from the lights got pushed out when you connected it. i pushed the ground back in and now they work. thanks for all the help

 
Rep Power: 0

ok finally here are some pics of the fogs, hopefully get more up soon of them actually on.