Rep Power: 262

Okay, my front bumper on my civic is Fiberglassed in so i cant take it off in order to take the TYC Projects out. The TYC projectors use H1 HID bulbs, and people are saying the whoel has to be bigger... can this be done without taking the lights out?... Please let me know, i have to make the purchase very soon

 
Rep Power: 0

how else are u going to get a drill or a file behind the lense INTO the little hole that has to be enlarged...

yes, the tycs have to be off the car

 
Rep Power: 262

:-'(

 
Rep Power: 511

yea man.. you're gonna have to find a way to take the bumper off... its kinda hard to drill that hole out, and you're prolly gonna wanna have a good vacuum right behind the drill/right next to the hole to suck out all the metal bits that fly off so they dont end up in the headlight..

 
Rep Power: 434

you can't avoid the bits of plastic and metal that will get into the headlights. it's best to take the entire headlight apart and give the projector (lens and bowl) a proper cleaning before you put it together again.

 
Rep Power: 262

a freiend of mien said its seperate lights for Higha nd LOw ando nly the H1 is used for High.. so the Low is H7.. that doesnt need any customizing??

 
Rep Power: 434

your "freiend" is retarded. tyc uses H1 bulbs for low and high. if you would've searched, you could've found that info out.

 
Rep Power: 262

damn... theres no way to drill while having the headlight on the car...? i can vacuum the dirt out no problem, but is it possible to drill while the lights are still on the car?

 
Rep Power: 434

not unless you and your drill are incredibly flexible.

 
Rep Power: 359

let me see if I'm reading this issue right.

In order to change the bulbs, the in/out opening needs to be opened up more by filling?

 
Rep Power: 262

No man, my bumper is fiberglassed to the fenders, i cant take the headlights out. In order to put TYC Hid Bulbs in you need to drill in the whole more, so i was wonderinf if this drilling can be done with the light STILL on the car instead of taking it out. Cleaning i is not a problem, just the drilling.

 
Rep Power: 0

dude why cant u take the bumper off....i hve fiberglass bumber too...and hve take my bumper off like 20times now...i am so good at it now i can tke the bumper off in like 5 mint max.....dud..

 
Rep Power: 294

Because, as you cannot read, his bumper is fiberglassed (or molded) to his fenders.

Honestly, perhaps you could manage the flexibility with dropping the motor out of the way - but I don't see how that should be considered the route to go.

 
Rep Power: 0

Ok So He Got It Molded To His Fenders......i Would Take It To Body Shop....and Cut A Line... After Putting Hid....take It Back To Shop Agin And Get It Molded..

 
Rep Power: 0

i have the tcy headlight and recently the beam focus began pointing down would you or anyone out there know how to adjust the lens?

 
Rep Power: 434

search