Rep Power: 0

so i have just installed sonar projectors and there is 3 pillar type bolt things on the back.. i am turning them to get it to aim right, but i cant seem to move the night time light, just the high beams.. what gives? ..
can someone help.. as i have my bumper off and my light sitting on a box. ( i cant get to the screws with it installed.)

 
Rep Power: 452

Moved to the Lighting forum

 
Rep Power: 334

on the back you got three screws for the high beams and two for the projectors right?

 
Rep Power: 0

there is 3 screws on the back yes, but i only notice movement with one of the screws .. it moves the high beams.

 
Rep Power: 334

the set of 3 screws are for the high beams and the set of 2 screws are for the low beams (the projectors). For high beams the screws to the right and left move the beam right and left and the one screws on the bottom moves the beams up or down by tightening and loosening the screws. Now for the projector you only got the two screws and what you gotta do is tighten the right and left screws evenly and that will move the beam up and down. It may take some time to adjust everything. I suggest parking your car in front of a garage and mark off where you want the beams to be on the garage and start from there. Hope this helps