My civic will only start with a ELM 327 code reader plugged in.
04-01-2015
#1
Registered!!
Thread Starter
Join Date: Mar 2015
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 
My civic will only start with a ELM 327 code reader plugged in.
I have an 05 Civic LX with 170,000 miles on it. It blew a head gasket and over heated. A few days latter, I was not sure if it was a head gasket so I added coolant and drove it. It ran for about a day, having to watch coolant level, but then it just wouldn't start back up.
I removed the head and had it checked, replaced the gaskets and put it back together, but it would not start. I fiddled with it for a long time, then used a ELM 327 code reader to try to figure things out, and it started. Now, if I take the ELM out it will not start. It will only start will the ELM plugged in. Any thoughts on what the problem might be?
I removed the head and had it checked, replaced the gaskets and put it back together, but it would not start. I fiddled with it for a long time, then used a ELM 327 code reader to try to figure things out, and it started. Now, if I take the ELM out it will not start. It will only start will the ELM plugged in. Any thoughts on what the problem might be?
04-01-2015
#2
If you think a good mechanic is expensive, try hiring a bad one
Re: My civic will only start with a ELM 327 code reader plugged in.
Now, if I take the ELM out it will not start. It will only start will the ELM plugged in. Any thoughts on what the problem might be?
Does this look familiar?
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Default_Slayer
Electrical DIY
10
12-04-2022 07:56 AM
mistermenphis22
Mechanical Problems/Vehicle Issues and Fix-it Forum
5
04-03-2016 08:06 AM
rcolosi
Mechanical Problems/Vehicle Issues and Fix-it Forum
4
04-29-2015 07:48 PM
