Mini part out: D-Spec/H&R/Neuspeed/SPC/Injen/EL+615/misc
Mini part out: D-Spec/H&R/Neuspeed/SPC/Injen/EL+615/misc
FS: Most of these parts have been sitting in my basement since Christmas.
Scarborough/Markham area
Tokico D-Spec adjustable dampers (enlarged to 16mm for 04-05civic) - $450
*It actually fits 03-05, see page 2 for detail
SPC Camber Kit (rear arm + 2 SPC & 2 Ingalls 16mm front bolts) - $140
Unknown Cold Air Intake - poor fitment, I couldn’t install it - $Will sell for dirt cheap. Maybe possible to cut/turn into short ram.
AEM DryFlow Synthetic Filter 3", Brand New - $55 "SOLD"
RSX 19mm rear sway bar - $45
*(no bushings/endlinks, reuse your original one)
OE front pads (<5000km) - $ Make an offer
Subaru Forester 15*6 (+48offset 5x100) Steelies - $80
EL premium rims with Falken RT-615 (205/50/15) - asking $500 (SOLD to fit forum member and TCC)
Very grippy summer tires.
Couldn't find a picture of my car with the Falkens on, but here's a reference picture of my other EL premium rims on winter tires.
H&R sport springs - $60 (SOLD to "mpfive")
Neuspeed Upper Strut Bar (polished) - $90 (SOLD to "shaman")
Neuspeed Lower X-brace (bit rusty but works)- $45 (SOLD to "shaman")
*The rust got washed out by the flash, will retake on a sunny day.*
Injen short ram intake - $?? please make an offer. (SOLD to "mpfive")
Thanks for looking.
Scarborough/Markham area
Tokico D-Spec adjustable dampers (enlarged to 16mm for 04-05civic) - $450
*It actually fits 03-05, see page 2 for detail
SPC Camber Kit (rear arm + 2 SPC & 2 Ingalls 16mm front bolts) - $140
Unknown Cold Air Intake - poor fitment, I couldn’t install it - $Will sell for dirt cheap. Maybe possible to cut/turn into short ram.
AEM DryFlow Synthetic Filter 3", Brand New - $55 "SOLD"
RSX 19mm rear sway bar - $45
*(no bushings/endlinks, reuse your original one)
OE front pads (<5000km) - $ Make an offer
Subaru Forester 15*6 (+48offset 5x100) Steelies - $80
EL premium rims with Falken RT-615 (205/50/15) - asking $500 (SOLD to fit forum member and TCC)
Very grippy summer tires.
Couldn't find a picture of my car with the Falkens on, but here's a reference picture of my other EL premium rims on winter tires.
H&R sport springs - $60 (SOLD to "mpfive")
Neuspeed Upper Strut Bar (polished) - $90 (SOLD to "shaman")
Neuspeed Lower X-brace (bit rusty but works)- $45 (SOLD to "shaman")
*The rust got washed out by the flash, will retake on a sunny day.*
Injen short ram intake - $?? please make an offer. (SOLD to "mpfive")
Thanks for looking.
Last edited by legacyse; Aug 14, 2010 at 07:50 PM. Reason: Mar,29: Springs + Injen sold, Apr 2: Tire/Rim + bolt size update, Apr 3: Rim/tires sold, photos added
Re: Mini part out: D-Spec/H&R/Neuspeed/SPC/Injen/EL+615/misc
I've put about 30 to 35k km max on the shocks.
Still have the original box.
I drove them 90% of the time on hwy 404, hwy 9 and mainly on hwy 400 (to Barrie)
ps- All PMs replied.
Still have the original box.
I drove them 90% of the time on hwy 404, hwy 9 and mainly on hwy 400 (to Barrie)
ps- All PMs replied.
Re: Mini part out: D-Spec/H&R/Neuspeed/SPC/Injen/EL+615/misc
Sorry, I wouldn't part them unless you can find a buyer for the EL premiums.
The Falken RT-615 set weren't my daily.
I only get to use them for 2 lapping days and probably 3000km on top.
These are the best street tires I ever own.
I have my OE rims & 712 as daily.
The Falken RT-615 set weren't my daily.
I only get to use them for 2 lapping days and probably 3000km on top.
These are the best street tires I ever own.
I have my OE rims & 712 as daily.
Re: Mini part out: D-Spec/H&R/Neuspeed/SPC/Injen/EL+615/misc
Re: Mini part out: D-Spec/H&R/Neuspeed/SPC/Injen/EL+615/misc
Let me know where I can get D-specs for $400, i would like to purchase a set right now for my new FG2 
It is about $760 + tax @ JPR.
We're from Canada btw, buying from states is an option but shipping a box which barely fits the trunk and weight approximately 50-60lb isn't going to cheap.
$600 (dezod.com) + shipping + tax/custom + enlarge to 16mm.. well.. we wish to live in the states where we dont' have to pay those extras.

It is about $760 + tax @ JPR.
We're from Canada btw, buying from states is an option but shipping a box which barely fits the trunk and weight approximately 50-60lb isn't going to cheap.
$600 (dezod.com) + shipping + tax/custom + enlarge to 16mm.. well.. we wish to live in the states where we dont' have to pay those extras.
Re: Mini part out: D-Spec/H&R/Neuspeed/SPC/Injen/EL+615/misc
IIRC, i thought 04-05 & RSXs were 16mm.
I'm not 100% sure tho.
I just check SPC, it says 03-05 are 16mm.
Ingalls says late 02-05.
Tokico makes 01-02 (14mm) (So i guess 03-05 are indeed 16mm)
Could any body chim in to confirm? 03 may have a chance to be 16mm.
I'm not 100% sure tho.
I just check SPC, it says 03-05 are 16mm.
Ingalls says late 02-05.
Tokico makes 01-02 (14mm) (So i guess 03-05 are indeed 16mm)
Could any body chim in to confirm? 03 may have a chance to be 16mm.
Re: Mini part out: D-Spec/H&R/Neuspeed/SPC/Injen/EL+615/misc
Confirmation:
2001 - 2002 is 14mm
For 2003 - 2005, it is 16mm
http://www.hondaautomotiveparts.com/...SHOCK+ABSORBER
Whoever were interested in the D-specs before please message me back if yours is 03.
Thanks.
2001 - 2002 is 14mm
For 2003 - 2005, it is 16mm
http://www.hondaautomotiveparts.com/...SHOCK+ABSORBER
Whoever were interested in the D-specs before please message me back if yours is 03.
Thanks.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Tim1959
Mechanical Problems/Vehicle Issues and Fix-it Forum
2
Jun 3, 2015 08:15 PM
juror
Mechanical Problems/Vehicle Issues and Fix-it Forum
5
May 26, 2015 06:35 PM
trellex
Mechanical Problems/Vehicle Issues and Fix-it Forum
5
May 24, 2015 04:39 PM
Wild Cranker
Mechanical Problems/Vehicle Issues and Fix-it Forum
1
May 19, 2015 06:10 PM








