Rep Power: 0

i was wondering how would i go about wiring a DVC sub into a 4 ohm parallel? would i wire the positive to positive and then to the positive on the amp and the same for the negative? thanks for the info.[IMG]i/expressions/face-icon-small-confused.gif[/IMG]

 
Rep Power: 346

What ohms are each of the individual voice coils??

 
Rep Power: 0

i think 1.5, but im not sure. its the 13w7

 
Rep Power: 346

Oh, so for Dual 1.5 ohm voice coils, i think the only way you can wire it is in series for 3 ohms (that's positive to negative) or parallel for .75 ohms (that's positive to positive adn negative to negative).

 
Rep Power: 0

okay so if i wire it in series i would wire the positive on one voice coil to the negative on the other voice coil and then the other positive to the amp and the other negative to the amp? hope that makes sense.

 
Rep Power: 346

yeah, makes perfect sense, soudns good [IMG]i/expressions/face-icon-small-smile.gif[/IMG]

 
Rep Power: 0

alright thanks alot Ed.

 
Rep Power: 0

The JL site has a little configurator tool on it. Here: http://www.jlaudio.com/tutorials/wiring/index.html and here: http://www.jlaudio.com/tutorials/wiring/1dvc.html