Rep Power: 0

Ok, So I am getting ECU code 14 (IACV). As I've taken it in and out to clean it, I've unplugged the wires to it, and somehow or another also unplugged a wire next to it off of a vacuum line, and they are the exact same, and not sure which one goes where. One is grey, one is white, put both fit on either connection. And since I have been having idle trouble for a long time now I'm not sure how long ago i made the mistaken wire swap. So any help would be great.

Does the white one go to the IACV or to the vacuum lines?

Thanks

 
Rep Power: 518

Swap them and see what happens

 
Rep Power: 0

I have swapped them around, and messed with the idle. The problem is that I messed with the idle before I realized that I might have swapped them on accident. I'm hoping someone will will go look at the plug on their IACV and tell me what color it is. white or grey?

 
Rep Power: 518

My wire diagrams have


IACV, gray, wire colors yellow/black and blue/yellow

EVAP Purge solenoid, gray, wire colors yellow/black, and red

IAT sensor uses white connector, red/yellow and green/white

 
Rep Power: 0

Thank you!

 
Rep Power: 518

Oh hey I was looking at a diagram for a 92 car. Izzat right?

 
Rep Power: 0

Yes perfect, thanks again