Melted Brake Master Cylinder cap!?!?!

Thread Tools

Search this Thread

Aug 28, 2013

Koch98EX

Thread Starter

Registered!!

Joined: Aug 2013

Posts: 9

Likes: 0

Rep Power: 0

Koch98EX is an unknown quantity at this point

Melted Brake Master Cylinder cap!?!?!

just found that my cap is melted and has 2 wires on it that are not connected to anything, will it be okay? or do I need to order a new one? also where does the wires hook up at.

Name: civic_zps42339fea.jpg
Views: 1669
Size: 51.1 KB

Aug 28, 2013

marek91

Registered!!

Joined: Jul 2009

Posts: 282

Likes: 0

From: Wasaga Beach

Rep Power: 0

marek91 is an unknown quantity at this point

Re: Melted Brake Master Cylinder cap!?!?!

The two wires are for a sensor in the cap, the monitors the brake fluid level, i bet with the wires disconnected the brake light on the dash will be on (!) . . .

I would replace it and are the wires disconnected on the cap side or main harness side ?I am not certain were they go from the cap but I sure some one can look it up

Aug 28, 2013

ezone

If you think a good mechanic is expensive, try hiring a bad one

Joined: Dec 2011

Posts: 32,017

Likes: 256

From: Midwest. Aiming about mid-chest

Rep Power: 518

Re: Melted Brake Master Cylinder cap!?!?!

Found this pic of how it connects, maybe your wires fell down behind the strut tower area.

Aug 29, 2013

BlueEM2

Whachya lookin at?

iTrader: (1)

Joined: May 2009

Posts: 6,388

Likes: 13

From: Canada

Rep Power: 313

Re: Melted Brake Master Cylinder cap!?!?!

Vewwwwwwy Intewesting... Never seen that before.

Aug 30, 2013

Koch98EX

Thread Starter

Registered!!

Joined: Aug 2013

Posts: 9

Likes: 0

Rep Power: 0

Re: Melted Brake Master Cylinder cap!?!?!

Quote:

Originally Posted by marek91

i bet with the wires disconnected the brake light on the dash will be on (!) . .

No brake light now, Thinking about just getting a Chrome cover to keep moisture out, since it seems like it doesn't effect the braking on the car.

Sep 3, 2013

Koch98EX

Thread Starter

Registered!!

Joined: Aug 2013

Posts: 9

Likes: 0

Rep Power: 0

Re: Melted Brake Master Cylinder cap!?!?!

Found the connectors, they was down beside the inner fender. But since I have no problems with the brakes, lights ect. I decided to save $30 and just filled the whole that was in the cap with some 60 Second epoxy nice water proof fix.