Rep Power: 0

Hello, I have a 2000 Honda Coupe EX. I jumped a curb and side swiped a curb. My rear left lower control arm was bent, and I replaced it. The rear left subfame is also semi-ripped where the screw hole for the LCA screws goes. I temporarily fixed it with jb-weld but am going to need to replace the entire left subframe. Currently, my vehicle pulls to the left. and when I drive straight my vehicle steering wheel is exactly positioned like this to keep the car driving straight.



Here is my alignment specs.



I am going to replace both front lower control arms, will this help with my alignment (caster)?

Thank you.

 
Rep Power: 351

JB weld??? jeeeeeze and here i thought i used it for everything.

that dash doesnt look like a 2000 civic tho.

 
Rep Power: 0

that steering wheel is not the actual picture of my civic. i just used it as reference.

 
Rep Power: 0

yeah my transmission case also got cracked. i drained the transmission oil filled the crack with jb weld and good as new! no leaks what so ever.

 
Rep Power: 0

ok just ordered two front lca with bushings and ball joints for 155 shipped. any instructions on how to install them? thanks.

 
Rep Power: 0

this is how my driver side wheels looks like. wheel pushed towards rear.

 
Rep Power: 366

^ is this with the new arms? ...

 
Rep Power: 0

no, not new arms, old arms. hopefully the two lca will fix my steering problem and there will not be an issue with my front subframe.

 
Rep Power: 366

hope all goes well

 
Rep Power: 0

did not work