Rep Power: 0

I searched for like 2 hours and wanted to know will any dohc cams fit on our civic and if not then which companies make new cams? I was thinking the the older si 98-00 cams should fit. Any help is appriciated. I wanna port and polish but i wanna see if i can get new cams first. Thanks

 
Rep Power: 0

No, the old cams may just fit right on there but they won't work, it's a different engine, I wouldn't try that. AEM makes the part, AEM Cam Gear, check out the parts section, later- joe

 
Rep Power: 0

Wouldnt you rather have an aftermarket cam instead of a stock one. Last time I checked, most were not as much $$$ and gave better performance gains.

 
Rep Power: 0

the dohc cams cannot work on our car. we have a sohc vtec motor so the camshaft has intake and exhaust lobes. on the dohc motor there are obviously 2 camshafts and one has intake lobes while the other has exhaust lobes. Check out Linck'd, they have a port and polish package (~1,650) that includes a new camshaft[IMG]i/expressions/face-icon-small-cool.gif[/IMG]

 
Rep Power: 0

there are after market cams out for us. im not shure who has them but from what ive heard crane cams has the best cams around. see if they have some if not pick up a sport compact car, honda tuning, turbo...magazines

 
Rep Power: 0

If anyone wanted to try something, try to a head swap with a B16A2 or B18C - assuming you want V-tec. Who knows, it might work.

 
Rep Power: 0

go learn about engines before you attempt engine work

 
Rep Power: 0

i know about engines and i thought i would be possible consedering that they look to be about the same displacement and bolt pattern there is no need to get nasty avenger.

 
Rep Power: 0

Gude (Bullfrog) has cams for our car. They're not on their website though, you'd have to call them.

 
Rep Power: 0

<< know will any dohc cams fit on our civic >>




dohc cam in a sohc head numbnutz

 
Rep Power: 0

DID ANYONE SAY CAMS? Look into Jun cams. R&D should b finished soon. If u haven't heard of Jun, ur sick.

 
Rep Power: 0

ASWzero and bluebullet.....you cannot but a B series head ( the head contains the cam(s) )on a D block motor. it will not fit. you may try to put an old D head on a block...that might work but i dont think anyone is trying it although it has been discussed here before. i believe the only D series engine with a DOHC is a late eightys integra, someone wanna verify that for me?