Rep Power: 0

i used to race my old 96 Mitsubishi GSX. Now its just sitting because the transmission is messed up. I wanted to turbocharge my 04 honda civic coupe ex em2. I was wondering if you guys know anything about taking the turbo kit off the mitsubishi and building it unto your em2. Any help? please let me know because imma take off the turbo kit and see if it will fit with a custom build. Thanks.

 
Rep Power: 0

man this site dont have people who are kool to help me out...gayed!

 
Rep Power: 0

OK, so I used to have a 2002 Civic EX coupe. I used the HKS manifold to use a 16G Turbo from Mitsu (will also work with the 14b T25 and 20G, internal wastegate) then had a local shop build the down pipe which wasn't very long as an aftermarket downpipe for the EX lines up pretty well (you have to run an O2 sensor "interference system" because there won't be a Catalytic Converter. A universal FMIC works great. You can use the feed line off the back of the engine next to the oil filter. Just drill a hole in your oil pan and put a 2 lock connection on the oil pan and connect the lines.

If your turbo needs a water line, you'll have to run that off an aux line as well. Mine was just oil... If you need any more information, let me know. The HKS turbo manifold is A LOT more reliable than the tubular styles around, especially if you're running stock internals.

It ran really lean at 6-8 lbs. A Walpro 190 fuel pump and some upgraded injectors will fix that problem. Don't go over 10lbs as that's how I blew my engine. LOTS OF POWER compared to stock though.

 
Rep Power: 0

now we're talking thx bro...ill be looking for that manifold almost got the turbine off the gsx..thx...