Rep Power: 266

does anyone have a diy for installing the front camber bolts? and also, as a matter of opinion, woudl it be worth while for me totry this or should ijust ake ti somewhere and have them installed and the camber aligned trogether?

 
Rep Power: 360

The install is easy; but the alignment without the proper tools or know how would be a pain. I would take it somewhere and have them do it.

Sears will guarntee the alignment for 6 months. so if it feels weird they will do the whole alignment again for free!

a god send for a lowered car! bar none!

 
Rep Power: 266

hmm that sounds like my best bet. not many places around here can do a lowered car. took it to pep boys last time, and its felt wierd ever since.

 
Rep Power: 412

take old bolt out, put new bolt in, roll to alignment center, get alignment, roll out

If you pay them to install a bolt, I will personally kick your ***.

 
Rep Power: 266

lmao alright, sounds easy enough. nother question though. i noticed that with the 01-02s there were options on either a 14mm or 16mm bolt. with the neuspeed sport drop, is the 14mm bolt the appropriate one, or should i have gotten the 16s?

Edit: Also, thsi question may be a little late in coming, but which bolt do i replace?

 
Rep Power: 266

bump for the same question, still need an answer

 
Rep Power: 326

it's soo easy.. .install. get aligned.

 
Rep Power: 266

which bolt to change? ive yet to take the wheels off, as the weather has not been the best for it.

Also, how easy is installing the rear camber kits?

 
Rep Power: 0

there no DIY on this?man i will soon need to get a camber kit tooo..if u do install urs make a DIY ok?lol

 
Rep Power: 272

it comes with directions. for someone with almost 1000 posts you sure are pretty noob. i searched and found it on the first page. remove the top bolts. replace the bolts. DONE. its not hard. the rear camber kit is 3 bolts. undo 3 bolts, take the upper control arm off, replace it with your new one, put the 3 bolts on. SPC has the ENTIRE diy on their site. at least try to look for it.

 
Rep Power: 266

for all ur sarcasm that was the most helpful response ive gotten so far. thanks. Do you know if i should have gone with the 14mm or 16mm bolts for a neuspeed sport drop?

O and when you buy them second hand they dont come with directions

 
Rep Power: 247

01-03=14mm
05-05=16mm
install is easy...just look at the picture in the instructions!!

 
Rep Power: 272

lol sorry. but yeah. here il try to link you to SPC site. the intructions are there.

http://www.spcperformance.com/PerfTe...rojHon1_E.html
REAR ALIGNMENT and FRONT ALIGNMENT. shows you step by step. rep please lol.

its not really a step by step but it is very informative, im sure you will be able to do it with that.

edit: heres some more useful info for you.
http://www.spcperformance.com/PerfPa...art_EZCam.html

 
Rep Power: 352

^rep +1