SF Turbo Kit + Rims + Springs + Exhaust
Thread Starter
Registered!!
iTrader: (1)
Joined: Oct 2003
Posts: 126
Likes: 0
From: So. Cally
Rep Power: 0 
SF Turbo Kit + Rims + Springs + Exhaust
Baby on the way forces sale, all parts are on my 2003 EX 4door, with way under 5,000 miles total, and all parts are flawless, like new condition.
1. Tein STech springs- $60
2. Magnaflow Cat Back $200 (full kit, but weld on, i have fittings for ex and lx)
3. HKSA catless midpipe (fits EX, is about 2.5" mandrel, eliminates the cat, and replaces it with a non restricting resonator, also i welded on a catalytic heat shield so it will pass a police visual inspection). I will also include an O2 sim. $175
4. Konig Helium silver 17's, with Yoko es100 mounted all around (size 215/45/17, not 40 series, but 45 series, so no spedo miscalibration), i choose these tires by tread wear, low weight, and reputation. $750 with locks and lugs. Tires are like new-id guess 95% tread remaining,...
5. SF turbo kit. candy blue powder coated pipe. Equal lenght manifold upgrade (black). Turbo upgrade. Plus i have alc. injection upgrade, with seperate pump and custom tank (its real trick). Also my set up is fairly custom in that the fuel pump comes on with boost and is not on all the time, so fuel economy is unaffected if you baby the car, and the spressure switch for the fp is located in a black box along with the alc. on switch, with one lead, rather than mounting all the switches on the intake pipe.. its clean. I will also include a sportcomp boost gage in a custom A/C vent mount.
Asking $2700 (remember, no delay in delivery, no build time required, etc.)
Also, note that if your local and have an ex, we can switch oil pans, so you dont need to drill/tap your own, as mine has a bung that is specially welded from the inside for the turbo oil drainage.
You can email me direct at estranho@aol.com, i can email pics, dont know how to post em.
thanks guys
and FYI, im located in Granada Hills, CA.
1. Tein STech springs- $60
2. Magnaflow Cat Back $200 (full kit, but weld on, i have fittings for ex and lx)
3. HKSA catless midpipe (fits EX, is about 2.5" mandrel, eliminates the cat, and replaces it with a non restricting resonator, also i welded on a catalytic heat shield so it will pass a police visual inspection). I will also include an O2 sim. $175
4. Konig Helium silver 17's, with Yoko es100 mounted all around (size 215/45/17, not 40 series, but 45 series, so no spedo miscalibration), i choose these tires by tread wear, low weight, and reputation. $750 with locks and lugs. Tires are like new-id guess 95% tread remaining,...
5. SF turbo kit. candy blue powder coated pipe. Equal lenght manifold upgrade (black). Turbo upgrade. Plus i have alc. injection upgrade, with seperate pump and custom tank (its real trick). Also my set up is fairly custom in that the fuel pump comes on with boost and is not on all the time, so fuel economy is unaffected if you baby the car, and the spressure switch for the fp is located in a black box along with the alc. on switch, with one lead, rather than mounting all the switches on the intake pipe.. its clean. I will also include a sportcomp boost gage in a custom A/C vent mount.
Asking $2700 (remember, no delay in delivery, no build time required, etc.)
Also, note that if your local and have an ex, we can switch oil pans, so you dont need to drill/tap your own, as mine has a bung that is specially welded from the inside for the turbo oil drainage.
You can email me direct at estranho@aol.com, i can email pics, dont know how to post em.
thanks guys
and FYI, im located in Granada Hills, CA.
Last edited by KingTorq; Feb 8, 2004 at 02:44 PM.
Thread Starter
Registered!!
iTrader: (1)
Joined: Oct 2003
Posts: 126
Likes: 0
From: So. Cally
Rep Power: 0 just fyi, you dont need a manual, mine is auto and it purrs. I had it at 11psi one day, racing a stick gsr from a stop(usual bolt ons), he got the jump pretty bad on me, middle of second i roarred passed him, spinning the tires to boot. hit third and foreget about it. But yes, the auto seems to take to the boost no problem, especially at 5psi where i drive with it daily.
Bring Hockey Back!
Joined: Feb 2003
Posts: 1,366
Likes: 0
From: Lethbridge/Calgary, Alberta, Canada
Rep Power: 0 your email addys wrong got my email sent back
email pics to hockeyguy77@hotmail.com pls
email pics to hockeyguy77@hotmail.com pls
Thread Starter
Registered!!
iTrader: (1)
Joined: Oct 2003
Posts: 126
Likes: 0
From: So. Cally
Rep Power: 0 Zachgeyer- i doubt you will pass a sniffer smog test as their is not cat, but if a cop looks under your car for a cat, or uses that mirror on a stick device thingy (the chp use it out here), he will visually find a cat, and thats one less ticket/problem to worry about.
Chrisgushue, i sent pics to you. Estranho@aol.com is right, but if you cut and pasted it, you may have picked up the "," comma after the addy. No prob, check your email.
Chrisgushue, i sent pics to you. Estranho@aol.com is right, but if you cut and pasted it, you may have picked up the "," comma after the addy. No prob, check your email.
Registered!!
Joined: Apr 2003
Posts: 120
Likes: 0
From: Buffalo
Rep Power: 0 I am very intersted in the turbo, if you could send pictures of it to stedesco007@hotmail.com I am intersted in seeing the powder coat as well Thanks Shawn
Thread Starter
Registered!!
iTrader: (1)
Joined: Oct 2003
Posts: 126
Likes: 0
From: So. Cally
Rep Power: 0 Cat back and rims are still available (no funds received yet), local sale preferred at this time.
Yes, the magnaflow comes as a bolt on, and you use U clamps to hold it on, many have complained about u clamps and i generally dont like them, so i had the kit welded up nicely. To get it off, one clean cut was made b4 the axle, and can be easily welded back together at that point. Locals, come check it out...
Yes, the magnaflow comes as a bolt on, and you use U clamps to hold it on, many have complained about u clamps and i generally dont like them, so i had the kit welded up nicely. To get it off, one clean cut was made b4 the axle, and can be easily welded back together at that point. Locals, come check it out...
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Wankenstein
Suspension Performance Modifications
13
Sep 26, 2023 06:44 PM
ShaneShepley
Bolt-on Engine Performance
2
Jul 21, 2015 05:25 AM
