Parts and Products Post new products, talk about parts other than electrical, drivetrain and suspension.
Sponsored by:
Sponsored by: CARiD

To those of you with the HKS exhaust..

Thread Tools
 
Search this Thread
 
Old Jan 3, 2004
  #1  
evanl85's Avatar
Thread Starter
Registered!!
iTrader: (2)
 
Joined: Sep 2003
Posts: 257
Likes: 0
From: VA
Rep Power: 0
evanl85 is an unknown quantity at this point
To those of you with the HKS exhaust..

I am looking into getting it, mainly because I think that most other exhausts will scrape on my driveway (it's a damn curb!). My question is though...are there really any gains? Did you feel any increase in power? Also, does it ever scrape? Thanks


-Evan
Reply
Old Jan 3, 2004
  #2  
Silversleeper's Avatar
Registered!!
iTrader: (5)
 
Joined: Apr 2002
Posts: 1,555
Likes: 0
From: Gaithersburg, Maryland
Rep Power: 0
Silversleeper is an unknown quantity at this point
From my personal experience, the exhaust hangs a tad too low, and due to the large diameter of the canister, the exhaust tends to scrape on the driveway. This can be resolved by modifying the hanger, or purchasing a new one (I wouldn't know which one to get though). But keep in mind, my car sits real low. You can see in my gallery.
Reply
Old Jan 3, 2004
  #3  
evanl85's Avatar
Thread Starter
Registered!!
iTrader: (2)
 
Joined: Sep 2003
Posts: 257
Likes: 0
From: VA
Rep Power: 0
evanl85 is an unknown quantity at this point
well, my car is stock height, but I may get a new hanger (you mean the rubber peices, right?) just so it looks closer to the bumper.
Reply
Old Jan 3, 2004
  #4  
JayFReaZy's Avatar
Registered!!
 
Joined: May 2003
Posts: 2,683
Likes: 0
From: Queens, NYC
Rep Power: 308
JayFReaZy will become famous soon enough
I have the HKS Hi-Power rear section. I do not have an aftermarket intake or header and I drive a AT tranny. Felt no gains what so ever, I just basically got it for the nice sound and I got it at a price that I simply couldnt pass up. My exhaust has never scrapped, and im not dropped.
Reply
Old Jan 3, 2004
  #5  
scansel912's Avatar
Registered!!
iTrader: (4)
 
Joined: Jul 2003
Posts: 1,785
Likes: 1
From: Central Ohio
Rep Power: 297
scansel912 is just really nicescansel912 is just really nicescansel912 is just really nicescansel912 is just really nice
I'm not sure if changing the hangers will do much because my tip is about 1/4" away from the bumper so its as bout as tight as it gets. I also have scraped once but that was coming down a driveway thats bout a 45 degree incline backwards and a 9 inch curb. My car is also dropped 1.75" so its very rare to scrape. The only gains I felt was the top-end RPM. I have AEM cai as well. Hope this helps.
Reply
Old Jan 3, 2004
  #6  
evanl85's Avatar
Thread Starter
Registered!!
iTrader: (2)
 
Joined: Sep 2003
Posts: 257
Likes: 0
From: VA
Rep Power: 0
evanl85 is an unknown quantity at this point
Well there's nothing wrong with top end gains , as long as you didn't lose low end (don't think you would w/ that exhaust)
Reply
Old Jan 3, 2004
  #7  
abmerop18's Avatar
Jam out with your clam out.
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (26)
 
Joined: Feb 2003
Posts: 21,820
Likes: 1
From: OH-IO
Rep Power: 513
abmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questioned
if you want an exhaust that will not scrape with a lowered car, get the greddy evo exhaust. when that exhaust what built, they specially designed it to sit up high and not scratch the pavement on lowered cars.
Reply
Old Jan 3, 2004
  #8  
abmerop18's Avatar
Jam out with your clam out.
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (26)
 
Joined: Feb 2003
Posts: 21,820
Likes: 1
From: OH-IO
Rep Power: 513
abmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questionedabmerop18 should not be questioned
oh, by the way, does anyone know if hks makes a full cat back for our cars or do they just have the axle back?
Reply
Old Jan 3, 2004
  #9  
dacivic's Avatar
Registered!!
iTrader: (22)
 
Joined: Feb 2002
Posts: 2,204
Likes: 0
From: VA
Rep Power: 0
dacivic is an unknown quantity at this point
hks only makes axle back for our car
Reply
Old Jan 3, 2004
  #10  
scansel912's Avatar
Registered!!
iTrader: (4)
 
Joined: Jul 2003
Posts: 1,785
Likes: 1
From: Central Ohio
Rep Power: 297
scansel912 is just really nicescansel912 is just really nicescansel912 is just really nicescansel912 is just really nice
nope, i didnt' feel any low end gains.
Reply
Old Jan 3, 2004
  #11  
one for the kid's Avatar
Registered!!
 
Joined: Mar 2003
Posts: 173
Likes: 0
From: Las Vegas
Rep Power: 0
one for the kid is an unknown quantity at this point
in my opinion, the exhaust hangs pretty low compared to other systems so if you want to get an exhaust that won't easily scrape, don't get this one.

my cars not even lowered and i scraped it once going up my friend's driveway i wasn't really going up at an angle but i didn't think that i would have to.

in terms of performance, i felt nothing. but then again, this was my first engine mod. if you already have intake and/or header then i would think you could feel something.
Reply
Old Jan 4, 2004
  #12  
555's Avatar
555
Registered!!
 
Joined: Feb 2002
Posts: 111
Likes: 0
From: Torrance, California, US
Rep Power: 0
555 is an unknown quantity at this point
Scraps a little, just be careful. Sounds good though.
Reply
Old Jan 4, 2004
  #13  
Robert_K's Avatar
Finally a Z Owner
 
Joined: Mar 2003
Posts: 347
Likes: 0
From: Kuwait via Colorado
Rep Power: 0
Robert_K is an unknown quantity at this point
I was nervous about the scraping also when I was looking at exhausts. My buddy has the Greedy Evo and regrets it thats why I went with the Tanabe Super Racing Cat-Back. I love it. Nice style and great sound!!!
Attached Thumbnails Click image for larger version

Name:	02civic w-tanabe srm.jpg
Views:	191
Size:	46.8 KB
ID:	17412  
Reply
Old Jan 4, 2004
  #14  
JDMPanda's Avatar
Registered!!
iTrader: (1)
 
Joined: Jun 2003
Posts: 109
Likes: 0
From: Southern New Jersey
Rep Power: 0
JDMPanda is an unknown quantity at this point
hmmm..with stock height u should not be scraping..i have a Neuspeed sport drop and I scrape sometimes...this exhaust wont make ur car lose any low end torque because of the piping of the axleback (2") instead of other axlebacks that have around 2.25 inch piping..

btw..i'm thinking of selling my HKS used for a year with some minor scrapes give me a reasonable price and I might sell if ur interested
Reply
Old Jan 4, 2004
  #15  
PJG's Avatar
PJG
Registered!!
 
Joined: Sep 2003
Posts: 371
Likes: 0
From: Crystal Lake, IL
Rep Power: 0
PJG is an unknown quantity at this point
I have the HKS with stock ride height, and I have never scraped.
I bought the exhaust because I was worried about scraping, and because I liked the sound of it.

I will give it two thumbs up.
Pat
Reply
Old Jan 4, 2004
  #16  
evanl85's Avatar
Thread Starter
Registered!!
iTrader: (2)
 
Joined: Sep 2003
Posts: 257
Likes: 0
From: VA
Rep Power: 0
evanl85 is an unknown quantity at this point
Any gains though?
Reply
Old Jan 4, 2004
  #17  
JDMPanda's Avatar
Registered!!
iTrader: (1)
 
Joined: Jun 2003
Posts: 109
Likes: 0
From: Southern New Jersey
Rep Power: 0
JDMPanda is an unknown quantity at this point
gains u get from my own experience:
crisper throttle response on the higher RPM's
freeway driving 70 mph (3000 RPM) feels like theres slightly more torque
thats how I would describe the exhaust before I installed my AEM CAi
Reply
Old Jan 4, 2004
  #18  
PJG's Avatar
PJG
Registered!!
 
Joined: Sep 2003
Posts: 371
Likes: 0
From: Crystal Lake, IL
Rep Power: 0
PJG is an unknown quantity at this point
yeah, JDMPanda says it correct. I agree fully.
Reply
Old Jan 4, 2004
  #19  
Eppilot's Avatar
Registered!!
 
Joined: Jan 2004
Posts: 24
Likes: 0
From: Folsom, Ca
Rep Power: 0
Eppilot is an unknown quantity at this point
I should be getting the Hi Power HKS cat-back Tuesday, so I will let you know, I’m really antsy to get it put on, I can’t wait.


-Ryan
Reply
Old Jan 5, 2004
  #20  
Robert_K's Avatar
Finally a Z Owner
 
Joined: Mar 2003
Posts: 347
Likes: 0
From: Kuwait via Colorado
Rep Power: 0
Robert_K is an unknown quantity at this point
Give some pics...
Reply
Related Topics
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
bhollie
7th Generation Civic 2001 - 2005
17
Sep 25, 2015 02:14 PM
MSoft
Parts and Products
25
Jul 28, 2002 08:10 PM
NoBottleJustThrottle
General Automotive Discussion
4
May 8, 2002 12:11 AM
2k2civic
General Honda Civic Forum Archive.
10
Mar 3, 2002 01:35 AM
htowncivicEX
Parts and Products
13
Jan 21, 2002 11:48 AM




All times are GMT -5. The time now is 09:39 AM.