Rep Power: 0

I had my stock spring put back on but and they make a popping noise everytime i turn or just turn the steering wheel i need to know are they on properly or not. Do they lock in place or what. I had a buddy do it for me so i am not sure they are on right

 
Rep Power: 315

did you put those caps on?

 
Rep Power: 432

What caps???

Seems like Springs arent seated correctly. You might have to reinstall spring again.
Use white lithium grease for uppermounts.Just in case.Even though . I recommend doing it

make sure you bolted tight all bolts.
Front nuts and bolts that hold shock assembly to brake assembly(2 on each side):
116ft lbs. (includes oem replacement bolts)

Front end links:
29ft lbs

Front bolts that hold the bracket and bushings on front sway bar:
29ft lbs

Front nut that secures tie rod to shock assembly:
32ft lbs

Front and rear shock tower nut in center (on top of shock)
33ft lbs

Front three shock tower nuts (on top of shock around center bolt)
33ft lbs

Front brake hose and wheel sensor harness bracket bolts:
10mm one: 7.2ft lbs
12mm one: 16ft lbs

Rear bolts to rear upper arm or camber kit (all three):
43ft lbs

Rear nuts on end links:
top: 28ft lbs
bottom: 29ft lbs

Rear bolt that holds brackets and bushings on rear sway:
16ft lbs

Rear bolt that holds bottom of rear shock:
45ft lbs

Rear two shock tower nuts:
43ft lbs

 
Rep Power: 315

ummm....the strut caps