Rep Power: 0

anyone know if the obx camber kit is good? it's cheaper than spc or ingalls , but u know the saying " u get what u pay for"...so give me some feedback! thanks

 
Rep Power: 412

OBX is a generic company but I think they do a good job at it. They make much better products than people really believe, at least in my mind. I don't see a problem with having an obx camber kit. But i haven't seen one in person.

 
Rep Power: 0

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2442467950


here's a pic of the front..

 
Rep Power: 432

all of front camber kits are cheap. just replacement front bolts.
01-02 uses 14mm
03 uses 16mm
spc ones are only 25-30 shipped. maybe cheaper

 
Rep Power: 0

im talking about both the front and back...i want both..

 
Rep Power: 432

yea i was talking about ebay auction for obx front camber bolt. where did you find information about obx camber kits? cause i havnt anyone who has obx camber kit installed on 7thgen. havnt seen any picture of obx camber kit either.

 
Rep Power: 0

welli found it on ebay! it was really cheap so i decided to post about it..

 
Rep Power: 0

so are front camber kits just a replacement front bolts? so is it a waste of money?

 
Rep Power: 432

front camber kit is replacement bolts. im not saying its waste of money but most people only buy rear camber kit. that ebay auction is only for front camber kit. i dont see anything about rear camber control arms in that auction. although i have no idea how much obx rear camber kit cost. anyways infos. spc camber kit

front:These cam bolts allow both positive and negative camber
changes up to approximately 1.75 degrees. They replace the
top 14mm factory strut/spindle bolts on each side of your ride
(01-02=14mm, 03=16mm)

Rears: These camber control arms replace your factory ones, and
allow adjustments in camber anywhere form -4.00 degrees to +6.00
degrees

pics


How much are you lowering your car? You might not even need one. I dont have camber kit with tein s tech springs.
rear camber kit pics. I had it but sold it while ago.
spc > ingalls imo. beefier and cheaper.

 
Rep Power: 0

im gonna lower with goldlines on my sedan...people say that i will most likely need a camber kit for the back..so should i just get a rear?

 
Rep Power: 432

rear camber kit is highly recommended with goldline drop imo, but it's not absolutely necessary. You can still lower your car w/o a camber kit, you just won't be able to realign it correctly. having a camber kit can't hurt you in the long run. But if you want to start off without one in the rear you will be alright, but you can't go wrong if you do get one. I wouldn't even bother with the front though.

 
Rep Power: 0

hmm really..so are revo camber kits anygood? i saw them on ebay too, for a good price