K20a swap, mandatory ac/ps removal?
this has been an atl01 production..
Joined: Jan 2003
Posts: 792
Likes: 0
From: Atl, Georgia, US
Rep Power: 292 
i will take some pics soon. Sometimes when the compressor kicks on i get a lot of vibration then it smooths out, why is this? does this happen to anyone else? Im pretty sure its because of the hasportmounts.
whoever said that you need to extend the rsx line needs to look at it again.. it was fine for me.. didnt need to extend any lines whatsoever.. heres the thing
if you want the a/c line to run to the left of the motor you get the EP3 a/c line.. if you want it to run to the right.. you get the RSX line
if you want the a/c line to run to the left of the motor you get the EP3 a/c line.. if you want it to run to the right.. you get the RSX line
I Hunt Goats, Rams, And Mustangs.
iTrader: (6)
Joined: May 2005
Posts: 2,360
Likes: 1
From: CenTex
Rep Power: 280 
Originally Posted by xproductionz
whoever said that you need to extend the rsx line needs to look at it again.. it was fine for me.. didnt need to extend any lines whatsoever.. heres the thing
if you want the a/c line to run to the left of the motor you get the EP3 a/c line.. if you want it to run to the right.. you get the RSX line
if you want the a/c line to run to the left of the motor you get the EP3 a/c line.. if you want it to run to the right.. you get the RSX line
That was me... I used a Type R Line.. and for some reason it was shorter. Simply put. But either way you can use an rsx line. So shhhh lol.
this has been an atl01 production..
Joined: Jan 2003
Posts: 792
Likes: 0
From: Atl, Georgia, US
Rep Power: 292
Originally Posted by TransformedBG
More straine on the engine = rougher idle.
u have to bump up the rpms idle... i bumped mines from 900 to 940 and that did the trick
oh.. and i raised the iacv to the line before the last
oh.. and i raised the iacv to the line before the last
Last edited by xproductionz; Jul 3, 2006 at 09:51 PM. Reason: Automerged Doublepost
this has been an atl01 production..
Joined: Jan 2003
Posts: 792
Likes: 0
From: Atl, Georgia, US
Rep Power: 292
Originally Posted by xproductionz
u have to bump up the rpms idle... i bumped mines from 900 to 940 and that did the trick
oh.. and i raised the iacv to the line before the last
oh.. and i raised the iacv to the line before the last
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
ClutchMasterOG
7th Generation Civic 2001 - 2005
1
May 31, 2015 03:25 AM
NeoMagus
General Automotive Discussion
581
Jun 20, 2002 01:33 PM
