Rep Power: 379

what are the size of the bolts that connect the down pipe to the turbo on a T25 its the 5 bolt downpipe, i think some have 4 bolts. only asking because there is one missing. opened the hood and noticed that, and don't want to have to take a bolt out because thier a pain to get back in.

 
Rep Power: 0

Chances are 8mm x 1.25

 
Rep Power: 280

Call TSI...
If something, I always email them or call them and they send me odd bits & pieces for free

 
Rep Power: 379

you got their phone number/ email?

 
Rep Power: 280

lol, I kne you will ask me this question!!!
I dont have it on me now, but I posted for another member about 1 mnth ago....I think thread read something like: "Another problem with TSI kit".....
I'm still under warranty with TSI, so they do it for me, but this free service will expire in june'06...

 
Rep Power: 280

here: TurboSpecialties@aol.com
Will you be interested in repping me?

 
Rep Power: 379

repped, and thanks.

 
Rep Power: 423

if its a garrett, its probably 8x1.25 as already stated.

 
Rep Power: 379

this is what TSI sent me

I AM NOT SURE WHAT SIZE THEY CALL IT BUT USING A MICROMETER THE BOLT HAS 7.56mm OD FOR THE THREADS AND THE HEX HEAD IS 12.88 mm OR 13 mm SIZE LENGTH IS 1 INCH OR 25mm

 
Rep Power: 423

if its a 13mm head, thats a standard size head for an 8mm bolt shank.
I'd go pick up some 8s. The diameter sounds about right too.

 
Rep Power: 379

kool looks like thats my mini project for tomarrow after work. along with my hybrid bumper install. then golf

 
Rep Power: 0

 
Rep Power: 379

thats what im gogin to go buy today. when i got off work yesterday it was to dark to do anything.