Engine Swaps Post information/questions about Engine Swaps here!

k20 Swap

Old May 21, 2005
  #1  
xproductionz's Avatar
Thread Starter
iTrader: (14)
 
Joined: Jul 2004
Posts: 3,120
Likes: 2
From: Las Vegas, NV
Rep Power: 297
xproductionz is just really nicexproductionz is just really nicexproductionz is just really nicexproductionz is just really nice
k20 Swap

Okay.. for those of you that would like to add in your 2 cents on how to do the k20 swap(for those of you that did it) then that would greatly be of help to everyone on this forum that either wants to do it or in the process of doing it themselves (and might have some problems)... basically it comes down to this.. i have already posted (its stickied up top) the wire harness that you need to rewire for the k20 wire harness to work on in a d17 (courtesy of dark2k1)... plus with the addtion of adding extra wiring for the 02 sensor which the d17 clip doesnt have... so what else has everyone else come into along during the swap that everyone might encounter and how to fix it??... as far as i know is the swap is straight forward with the modification of clip C101...
Old May 21, 2005
  #2  
quick silver's Avatar
472rwhp @ 7400 RPMs and 12.93 psi
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (7)
 
Joined: Jan 2005
Posts: 857
Likes: 0
From: So Cal
Rep Power: 0
quick silver has disabled reputation
There should be some additional instructions for putting a K20 into an '04-05 because there are some differences.
Old May 21, 2005
  #3  
Havok2k1's Avatar
Wicked Pissah Admin
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (3)
 
Joined: Sep 2001
Posts: 10,658
Likes: 4
From: Woostah
Rep Power: 413
Havok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant future
Isn't that what the swap FAQ is for?
Old May 22, 2005
  #4  
Drivetofast's Avatar
Supercharged k20a3
iTrader: (7)
 
Joined: Oct 2002
Posts: 568
Likes: 0
From: Laguna Niguel, California, US
Rep Power: 0
Drivetofast is an unknown quantity at this point
well i really big help for me is go out and buy the ECM harness form a 01 civic hx because it has all the wiring for the A/F ratio relay and all you need to do is ad power do the sensor side of the relay and it works great
Old May 23, 2005
  #5  
xproductionz's Avatar
Thread Starter
iTrader: (14)
 
Joined: Jul 2004
Posts: 3,120
Likes: 2
From: Las Vegas, NV
Rep Power: 297
xproductionz is just really nicexproductionz is just really nicexproductionz is just really nicexproductionz is just really nice
well the swap faq does give some general info but it doesnt give k20 specifics on how to do the swap yourself... especially the wiring..
Old May 23, 2005
  #6  
quick silver's Avatar
472rwhp @ 7400 RPMs and 12.93 psi
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (7)
 
Joined: Jan 2005
Posts: 857
Likes: 0
From: So Cal
Rep Power: 0
quick silver has disabled reputation
The Swap FAQ thread has gotten totally out of control and really needs to be cleaned up. It is no longer a FAQ thread--too much BS in there. It is a pain in the azz to try and go through the thread lookin for useful information.
Old May 23, 2005
  #7  
BumpinCivic2k1's Avatar
Registered!!
 
Joined: Jul 2001
Posts: 583
Likes: 0
From: NOVA
Rep Power: 0
BumpinCivic2k1 is an unknown quantity at this point
I've done the swap, and to tell you the truth, I didn't bother messing with the wiring; i just had hasport do it for me. i htink its 200 bucks or something for them to wire it for you, then its plug and play from there.
Old May 23, 2005
  #8  
Havok2k1's Avatar
Wicked Pissah Admin
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (3)
 
Joined: Sep 2001
Posts: 10,658
Likes: 4
From: Woostah
Rep Power: 413
Havok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant futureHavok2k1 has a brilliant future
Originally Posted by quick silver
The Swap FAQ thread has gotten totally out of control and really needs to be cleaned up. It is no longer a FAQ thread--too much BS in there. It is a pain in the azz to try and go through the thread lookin for useful information.

I disagree, over 200 posts were deleted in the thread and only useful stuff remains. Maybe people are too lazy to read it and ask questions there so others can benefit from it.

You want wiring help, ask in the wiring thread.

Guys, that is the whole point of the FAQ's. People ask questions in it that others can benefit from in the future.
Related Topics
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
bolt-on-bandito
Electrical
32
Jan 15, 2020 03:25 PM
Scout1
Mechanical Problems/Vehicle Issues and Fix-it Forum
12
Oct 5, 2015 01:33 PM
juicetayne
Mechanical Problems/Vehicle Issues and Fix-it Forum
2
Sep 30, 2015 11:02 AM
ThatGuy913
Mechanical Problems/Vehicle Issues and Fix-it Forum
6
Sep 28, 2015 05:35 PM
ttamrekab
Engine Performance Modifications
7
Sep 28, 2015 01:22 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:40 AM.