DIY: EM2 - D17 to K20 wiring swap and general info
#32
Thread Starter
iTrader: (14)
Join Date: Jul 2004
Location: Las Vegas, NV
Posts: 3,120
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 273
Originally Posted by ESK1k20A2
I called the acura dealership and they told the don`t know how to do that,and the K-pro it`s out of my budget for now,hasport said the engine should start for a few minutes
anyways the ecu is a 2 stage immobolizer... it does 2 different things.. one it cuts power to the fuel pump so it doesnt send any fuel to the motor... the second thing is that it kills the distributor or ignition on the motor so it wont provide a spark to the motor.. there is a way around the fuel pump but there is no way of getting around the other one. I dont know what hasport was talking about for a few minutes... it will crank buit wont start... hjowever there is a way around the igniter kill.... either get a kpro... or get a type r ecu... the type r ecu only has one of the kill features... and thats the fuel pump....
#33
I try everthing and nothing,Im sending the wire harness to hasport and I`m getting a K-pro ECU It`s been almost a year since I got the K20.
FInally I got some money save up to finish the swap jajaj
FInally I got some money save up to finish the swap jajaj
#34
Thread Starter
iTrader: (14)
Join Date: Jul 2004
Location: Las Vegas, NV
Posts: 3,120
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 273 i just relaized you were posting in the OLD outdated wiring thread... for everyone that reads this.. this thread is outdated and was never updated. If you want the COMPLETE UPDATED wiring for this then either click on the DIY in my sig of click on the STICKY at the top of the F/I page
#35
Re: DIY: EM2 - D17 to K20 wiring swap and general info
COURTESY OF Dark2k1
According to this it looks like these are the things you have to do..
take clip c101 from the k20 wireharness and move it as follows
move clip 1 into 4
move clip 2 into 5
move clip 3 into 6
leave 7 as is
leave 8 as is
move clip 9 into 17
clip 10** read note on bottom of image
leave 11 and 12 as is
clip 13** read note on bottom of image
move clip 14 into 19
clip 15** read note on bottom of image
leave 16 as is
move clip 17 into 9
leave 18 as is
clip 19** read note on bottom of the image
leave 20 as is
I think that covers it.. please feel free to add anything in.. especially DARK2K1 who supplied the wire harness diagram.
According to this it looks like these are the things you have to do..
take clip c101 from the k20 wireharness and move it as follows
move clip 1 into 4
move clip 2 into 5
move clip 3 into 6
leave 7 as is
leave 8 as is
move clip 9 into 17
clip 10** read note on bottom of image
leave 11 and 12 as is
clip 13** read note on bottom of image
move clip 14 into 19
clip 15** read note on bottom of image
leave 16 as is
move clip 17 into 9
leave 18 as is
clip 19** read note on bottom of the image
leave 20 as is
I think that covers it.. please feel free to add anything in.. especially DARK2K1 who supplied the wire harness diagram.
The following users liked this post:
Chucksgarage (06-19-2022)
#37
#38
Click Here
Join Date: Jan 2019
Location: Calgary, Alberta
Age: 23
Posts: 3,319
Received 1,157 Likes
on
904 Posts
Rep Power: 99 Re: DIY: EM2 - D17 to K20 wiring swap and general info
The following users liked this post:
Chucksgarage (06-19-2022)
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Default_Slayer
Electrical DIY
10
12-04-2022 07:56 AM
cloudguy
7th Generation Civic 2001 - 2005
1
04-28-2015 05:02 AM