Turbo Help
Thread Starter
250+ awhp Stage 2
iTrader: (19)
Joined: Jun 2003
Posts: 10,839
Likes: 0
From: Dallas, TX
Rep Power: 0 
Turbo Help
Ok I am new to turbos. I am buying a T3/T4 turbine, and I am wondering what else I would need to make the D17 turboed. Stuff like injectors, pipes, intercooler, and what else would I need? I want to run around 6 to 7 p.s.i safely.
Last edited by 2k2civ34; Dec 20, 2004 at 04:25 PM.
Joined: Jul 2003
Posts: 30,677
Likes: 1
From: Dallas, PA
Rep Power: 607 manifold
couplers
clamps
some type of fuel management
oil lines and fittings
bov
wastegate if your turbo is externally gated
downpipe
boost controller
gauges
missing link
and eventually.........clutch and tires.......and possibly.......headgasket and maybe a new bottom end if u are not careful.
couplers
clamps
some type of fuel management
oil lines and fittings
bov
wastegate if your turbo is externally gated
downpipe
boost controller
gauges
missing link
and eventually.........clutch and tires.......and possibly.......headgasket and maybe a new bottom end if u are not careful.
Joined: Sep 2001
Posts: 10,658
Likes: 4
From: Woostah
Rep Power: 413 http://www.7thgencivic.com/forums/sh...d.php?t=174045
Turbo FAQ ownz joo
There is a thread there on custom turbo setups and the parts needed....
Turbo FAQ ownz joo
There is a thread there on custom turbo setups and the parts needed....
Joined: Jul 2003
Posts: 30,677
Likes: 1
From: Dallas, PA
Rep Power: 607
Originally Posted by dezod
This is probably understating.
i concur
if you are going custom.......expect to pay more than a kit. Kits usually use cheaper products to keep the price of the kit down. With my SF kit, i had to spend a couple hundred extra for some better pieces.....mainly couplers, clamps and gaskets.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Jaryn
Engine Performance Modifications
9
May 17, 2016 02:52 AM
