Rep Power: 0

HI im having a problem with the oil feed line for the turbo, it is leaking oil forn the turbo side, and i dont know if it is the line or the turbo, but here the deal...

I had lost the fitting that came with the turbo and had to replace it, i dont know if it was the correct size but i used a 1/4 inch fitting, and it worked (on a T3 turbo), the prob is i dont know it it is cause its a 2 piece fitting, or because the tip where the feed line conects is not round....


what could it be???

Please help....

 
Rep Power: 0

Stupid question but ........ you did use teflon tape right?

 
Rep Power: 0

Yes i teflon taped everything ( the fitting int the turbo,the straight part of the fitting into the L shaped fitting, and the line to the fitting...

 
Rep Power: 607

even if the fitting is too small, it still shouldn't leak. You need to pinpoint where it is exactly leaking and go from there.

 
Rep Power: 0

What kind of turbo is it?

 
Rep Power: 0

T3, and it leaking from behind where you conect the line, the point where the line ends, and you screw it in...

 
Rep Power: 0

Anyone know what size is the fitting that comes with the SF turbo, is it 1/4 NTP to -6 AN