sf kit 2 questons
Thread Starter
Boosted Auto
Joined: Aug 2003
Posts: 1,897
Likes: 1
From: WI NewBerlin
Rep Power: 0 
sf kit 2 questons
ok i finaly got my kit but i have 2 questons.
1. are the blades on the turbo supost to turn i thought if they did the turbo was bad. if so can i get a rebuild kit for it? if i can where can i get one a link would be nice and how much will it cost me.
2. i have an ex and i thought the down pipe was supost to be longer for them. eather i did not get a down pipe or if the down pipe is allready conected to the manifold it is very short, shorter then the one on the picture for the directions on the 7th gen directions and the ones they sent me.
1. are the blades on the turbo supost to turn i thought if they did the turbo was bad. if so can i get a rebuild kit for it? if i can where can i get one a link would be nice and how much will it cost me.
2. i have an ex and i thought the down pipe was supost to be longer for them. eather i did not get a down pipe or if the down pipe is allready conected to the manifold it is very short, shorter then the one on the picture for the directions on the 7th gen directions and the ones they sent me.
Joined: Jul 2002
Posts: 232
Likes: 0
From: Atlanta
Rep Power: 0
Originally Posted by deciuss
ok i finaly got my kit but i have 2 questons.
1. are the blades on the turbo supost to turn i thought if they did the turbo was bad. if so can i get a rebuild kit for it? if i can where can i get one a link would be nice and how much will it cost me.
2. i have an ex and i thought the down pipe was supost to be longer for them. eather i did not get a down pipe or if the down pipe is allready conected to the manifold it is very short, shorter then the one on the picture for the directions on the 7th gen directions and the ones they sent me.
1. are the blades on the turbo supost to turn i thought if they did the turbo was bad. if so can i get a rebuild kit for it? if i can where can i get one a link would be nice and how much will it cost me.
2. i have an ex and i thought the down pipe was supost to be longer for them. eather i did not get a down pipe or if the down pipe is allready conected to the manifold it is very short, shorter then the one on the picture for the directions on the 7th gen directions and the ones they sent me.
When the blades don't spin...then you have a problem, and a rebuild kit won't solve it. A rebuild kit usually only comes with new bearings and not much else. If it is a brand new kit, I'm sure everything as far as the turbo is fine. Just make sure all the bolts are tight. Thread Starter
Boosted Auto
Joined: Aug 2003
Posts: 1,897
Likes: 1
From: WI NewBerlin
Rep Power: 0 ya cat sent me back a pm about it. i was just freeking out over nothing i guess at this point i expteded something to be wrong since it seems like every one has things going wrong with there set ups right now
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Hutch1051
Mechanical Problems/Vehicle Issues and Fix-it Forum
2
Sep 29, 2015 09:20 AM
beanhead
Archive - Vehicles for Sale/Wanted
1
Sep 24, 2015 12:04 PM
