How to set the greddy profec b spec II
Thread Starter
Registered!!
iTrader: (7)
Joined: Dec 2002
Posts: 2,848
Likes: 0
From: Bossier City, Louisiana, US
Rep Power: 0 
How to set the greddy profec b spec II
I dont know how to set the low and high cuz it shows it in percent and I dont know what PSI i would be at. Can someone tell me there setting.
New Member
Joined: Aug 2003
Posts: 892
Likes: 0
From: Louisiana
Rep Power: 0 Y CANT U GUYS JUST HELP HIM INSTEAD OF TELLING HIM TO SEARCH SEARCH SEARCH...either u do know or u dont...if u dont know off the top of your head then dont reply and I'm sure he will search once he sees there's no replies...some people 
<--- has 56K and doesnt have time to be doing all that searching and shitt...
<--- has 56K and doesnt have time to be doing all that searching and shitt...
Last edited by JetBlu01; May 25, 2004 at 03:38 AM.
Joined: Sep 2001
Posts: 10,658
Likes: 4
From: Woostah
Rep Power: 413 
Originally Posted by Havok2k1
The GAIN setting is used to control spiking. The first and third settings must be as close as possible to reduce spiking. The first setting is relative to the max psi your turbo can put out. Meaning 100% is MAX. Let's say you want to run 5 psi and your turbos max is 20 psi. Set the first setting to 25% and the third setting to 5 psi. If you want to run 10 psi set the first setting to 50% and the third setting to 10 psi.
Hope this helps.
Something I've found that makes a huge difference....
Once you start setting it, cycle from hi to lo or lo to hi. Make sure to do this everytime you start the car and once you get it set, the spikes will be gone. It made a huge difference with consistency on mine.
Once you start setting it, cycle from hi to lo or lo to hi. Make sure to do this everytime you start the car and once you get it set, the spikes will be gone. It made a huge difference with consistency on mine.
Originally Posted by andyman97
Something I've found that makes a huge difference....
Once you start setting it, cycle from hi to lo or lo to hi. Make sure to do this everytime you start the car and once you get it set, the spikes will be gone. It made a huge difference with consistency on mine.
Once you start setting it, cycle from hi to lo or lo to hi. Make sure to do this everytime you start the car and once you get it set, the spikes will be gone. It made a huge difference with consistency on mine.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Strycker
Wheels, Tires & Brakes Modifications
2
Aug 18, 2015 02:25 PM
Touge
Canada East
0
Aug 13, 2015 04:32 AM
Wankenstein
Mechanical Problems/Vehicle Issues and Fix-it Forum
8
Jul 12, 2015 11:54 AM
