SF turbo kit Tracking number thread
Thread Starter
Registered!!
iTrader: (2)
Joined: Mar 2003
Posts: 3,071
Likes: 0
From: Lancaster, California, US
Rep Power: 312 
SF turbo kit Tracking number thread
Alright. I have been gone from this site for a while now. We have been extremely busy with the kits, and waiting on parts. I already know that everyone is angry from the wait. The wait was from a combination of things happening.... The largest setback was wastegate actuators. With our turbo shipment for your kits, we unknowingly recieved 15 psi actuators. Now if you guys all had built engines with 8.8:1 compression ratios, i would have sent them out to you without hesitating. Since that is not the case, i had to wait. To remedy this, we had to purchase the 5 psi actuators for every persons kit. The shipment on those took a long time, but we did eventually recieve them directly from garrett late last week.
Everyone who sent me an email was given a response. I did recieve multiple emails containing some viruses (transmitted to everyone in that persons address book), so if you were infected with a virus like that, i did not recieve your email. So if you emailed me and have yet to get a response, please scan your computer.
Anyway, back to the point of this thread. Tomorrow (friday) i will be posting several tracking numbers along with the names of the people who will be recieving their kit. Our UPS pickup date is on thursdays, so look for updates on the tracking number thursday night or friday.
As the kits are packed up, i will post more tracking numbers. So if your name is not on the list tomorrow, please do not be discouraged, that just means that your kit is not in a box.
Again, i apologize for the delays. Please check back tomorrow for numbers.
And also please keep the miscellaneous chatter and bashing to a minumum. This is a thread for informing people of their shipments.
Everyone who sent me an email was given a response. I did recieve multiple emails containing some viruses (transmitted to everyone in that persons address book), so if you were infected with a virus like that, i did not recieve your email. So if you emailed me and have yet to get a response, please scan your computer.
Anyway, back to the point of this thread. Tomorrow (friday) i will be posting several tracking numbers along with the names of the people who will be recieving their kit. Our UPS pickup date is on thursdays, so look for updates on the tracking number thursday night or friday.
As the kits are packed up, i will post more tracking numbers. So if your name is not on the list tomorrow, please do not be discouraged, that just means that your kit is not in a box.
Again, i apologize for the delays. Please check back tomorrow for numbers.
And also please keep the miscellaneous chatter and bashing to a minumum. This is a thread for informing people of their shipments.
Thread Starter
Registered!!
iTrader: (2)
Joined: Mar 2003
Posts: 3,071
Likes: 0
From: Lancaster, California, US
Rep Power: 312 Here are the names and numbers.....
Mr. Kevin 1Z7Y475W0399481668
Mr. David 1Z7Y475W0398947050
Mr. Clifton 1Z7Y475W0396508840
Mr. Jorge 1Z7Y475W0399431033
Mr. Garrett 1Z7Y475W0192240050
there will be more later on.
Mr. Kevin 1Z7Y475W0399481668
Mr. David 1Z7Y475W0398947050
Mr. Clifton 1Z7Y475W0396508840
Mr. Jorge 1Z7Y475W0399431033
Mr. Garrett 1Z7Y475W0192240050
there will be more later on.
Last edited by Catalyst; May 14, 2004 at 02:03 PM.
Registered!!
iTrader: (4)
Joined: Apr 2001
Posts: 6,995
Likes: 0
From: Houston, Texas, US
Rep Power: 374 Any chance my name will be on this list coming up? I sent you an email Mike at catalyst@staffordfabrication.com about an address change. PLease respond so i know itll be sent to the proper address.
Can I get a cake when you all get your kits 
or an award hahahah.
Eddie
I SAY WE HAVE TRUEHONDA TURBO MEET, lets do it. Its good breakin miles for everyone. Ill take the hatch and we will see if you boosted beasts can take on the b18c
or an award hahahah.Eddie
I SAY WE HAVE TRUEHONDA TURBO MEET, lets do it. Its good breakin miles for everyone. Ill take the hatch and we will see if you boosted beasts can take on the b18c
Hey Mike, not sure if you'll see this or not but you guys don't need to bother sending me out anything else. I had a local welder fab a new water tank and I'm going to use a much more efficient, much bigger tranny cooler that I ordered from JEG's.
Registered!!
Joined: Mar 2003
Posts: 374
Likes: 0
From: Islamabad, Pakistan
Rep Power: 0 Hey Mike I have been mailing you for a quite a few days now and still havent got any response. Could be the virus thing. But I figure if I write here you could read it.
So, the last mail I got from you, stated that you would start packing up my stuff. And since I had an external wastegate, the actuator problem wouldnt apply to my case. This was on the 4th of this month. A lot of days have passed since then. Please let me know what is the current situation/progress of my order. Thanks!
So, the last mail I got from you, stated that you would start packing up my stuff. And since I had an external wastegate, the actuator problem wouldnt apply to my case. This was on the 4th of this month. A lot of days have passed since then. Please let me know what is the current situation/progress of my order. Thanks!
Originally Posted by opto_isolator
Hope you guys stick to your word about Monday - I've been waiting longer than all of these other folks.....
Registered!!
iTrader: (8)
Joined: Mar 2003
Posts: 3,024
Likes: 1
From: Zulu Alpha Tango Foxtrot
Rep Power: 311
Originally Posted by dragoon
No need to be an *** about it, I was aware you haven't had your kit in months but it's a surprise that SF did not send yours out first. What do you have against me? Calm down and if you have a problem feel free to PM me, instead of making yourself appear like an idiot.
Whoa - hold on a minute - I must have been fcked up or something when I wrote that.....I'm sorry.....oops....
to me.....Yep, its definitely a monday today! 
Registered!!
iTrader: (3)
Joined: Sep 2003
Posts: 284
Likes: 0
From: Waukesha Wisconsin
Rep Power: 0 Hey Mike-
Are you gonna get those boxes to UPS or are you just gonna print out the labels and give out tracking numbers? If mine doesn't ship today I'm gonna have to wait until next week to get it.
Are you gonna get those boxes to UPS or are you just gonna print out the labels and give out tracking numbers? If mine doesn't ship today I'm gonna have to wait until next week to get it.
Registered!!
iTrader: (8)
Joined: Mar 2003
Posts: 3,024
Likes: 1
From: Zulu Alpha Tango Foxtrot
Rep Power: 311 Well guys - Tuesdays pretty much come and gone. What happened to letting us know what's up? I realize you're busy making kits - I am seriously considering pulling all out and going with a maxrev manifold / downpipe. I called them on Thursday last week and found out they were going to have manifolds ready to ship for THIS WEEK....I could have been boosted about 2 months ago. Make me proud Mike - post a working tracking # for me...
Registered!!
iTrader: (8)
Joined: Mar 2003
Posts: 3,024
Likes: 1
From: Zulu Alpha Tango Foxtrot
Rep Power: 311
Originally Posted by Havok2k1
I just ran all of the tracking #'s and only the "Mr. Garrett" one has been even shipped....
Wow....I would have thought they would have went out last FRIDAY like they said. Guess its time to pull out the big guns....
Custom Titles are played out
Joined: Feb 2003
Posts: 1,980
Likes: 0
From: Pensacola, Florida
Rep Power: 302
Originally Posted by opto_isolator
Wow....I would have thought they would have went out last FRIDAY like they said. Guess its time to pull out the big guns....
I'm officially scared when Opto, says lets pull out the big guns.. 
Sorry about everything you guys have had to put up with, I'm glad I'm really indecisive and decided to go with a swap instead of going with a SF kit.. Registered!!
iTrader: (3)
Joined: Sep 2003
Posts: 284
Likes: 0
From: Waukesha Wisconsin
Rep Power: 0 Mike probably just had 1 kit ready and used it to print out the labels for everyone's tracking number so he could buy himself more time. This is such bs, there is no other explanation.
EDIT: Just looked at Mr. Garrett's. His wasn't even an SF kit, it only weighed 35lbs.
EDIT: Just looked at Mr. Garrett's. His wasn't even an SF kit, it only weighed 35lbs.
Last edited by player1002; May 19, 2004 at 02:33 PM.
I just talked to MIke at SF and he said that they just waiting for UPS regular come by on Thursday. He says at the end of this week that it all should be done.
