Post your turbo set up here
#1
BOOSTED HYBRID
Thread Starter
Join Date: Feb 2002
Location: fayetteville, North Carolina, US
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Post your turbo set up here
Since there seems to be a lot of turbo 7th gen civics. I just want to get an idea who at 7th gen civic is running any other turbo system or custom setup on their car...
Please list the vehicle it is equipped on including motor (d17 ex, d17 lx, k20, k24 etc...), the boost level you are running and if you have dyno results please post your wheel hp and tq numbers. Also post track times if you been to the track. (please indicate if on street tires, street "slicks" or drag only slicks).
Since their are so many variables in most other turbo kits or custom setups, please add details. One day you might look back on someone elses setup for insight on what to do next.
POST YOUR SETUP ONLY PLEASE
here's mine:
k20a2
cybernation turbo manifold
cybernation 9:0:1 piston
cybernation rods
turbonetics t3/t04e
rc 550 injectors
apexi safc II
Cybernation black magic
vortech 12:1 fmu
msd inline fuel pump
turbonetics wastegate
hks ssqv
spearco intercooler
2 1/2 aluminum piping
3 inch down pipe to 2.25 magnaflow exhaust
exedy stage II ceremetallic clutch
quaife lsd
autometer boost guage, a/f guage
20 lbs 354whp@282tq
track times: low 13's @113 My track set up is 17" rota msv's on falken anzenis st-115.
Tire pressure 20 psi on front tires. I don't rev at the line since I dont get any consistent times. Still working on the launch.
Looking to upgrade to a precision sc61, walbro intank fuel pump, aem ems, tial wastegate,
3" exhaust
Please list the vehicle it is equipped on including motor (d17 ex, d17 lx, k20, k24 etc...), the boost level you are running and if you have dyno results please post your wheel hp and tq numbers. Also post track times if you been to the track. (please indicate if on street tires, street "slicks" or drag only slicks).
Since their are so many variables in most other turbo kits or custom setups, please add details. One day you might look back on someone elses setup for insight on what to do next.
POST YOUR SETUP ONLY PLEASE
here's mine:
k20a2
cybernation turbo manifold
cybernation 9:0:1 piston
cybernation rods
turbonetics t3/t04e
rc 550 injectors
apexi safc II
Cybernation black magic
vortech 12:1 fmu
msd inline fuel pump
turbonetics wastegate
hks ssqv
spearco intercooler
2 1/2 aluminum piping
3 inch down pipe to 2.25 magnaflow exhaust
exedy stage II ceremetallic clutch
quaife lsd
autometer boost guage, a/f guage
20 lbs 354whp@282tq
track times: low 13's @113 My track set up is 17" rota msv's on falken anzenis st-115.
Tire pressure 20 psi on front tires. I don't rev at the line since I dont get any consistent times. Still working on the launch.
Looking to upgrade to a precision sc61, walbro intank fuel pump, aem ems, tial wastegate,
3" exhaust
Last edited by icebergslim; 09-23-2003 at 07:46 PM.
#2
OsOBaNNeD
iTrader: (5)
Join Date: Mar 2002
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 D17
-Stafford Fabrications Turbo Kit consisting of:
-Stafford Fabrications PFM fuel system
-Stafford Fabrications 2.25" intercooler piping (powdercoated blue)
-Stafford Fabrications 2.5" downpipe
-Stafford Fabrications 4-1 tubular manifold
-Stafford Fabrications InterCooler
-Stafford Fabrications Internal Wastegate
-Turbo XS BOV
-Garrett T3 turbo
-Apex i AVC-R Boost Controller
-Greddy Auto Turbo Timer
-Autometer CF Boost Control gauge
-Autometer CF Oil Pressure gauge
-Autometer CF Water Temp gauge
-Stafford Fabrications Turbo Kit consisting of:
-Stafford Fabrications PFM fuel system
-Stafford Fabrications 2.25" intercooler piping (powdercoated blue)
-Stafford Fabrications 2.5" downpipe
-Stafford Fabrications 4-1 tubular manifold
-Stafford Fabrications InterCooler
-Stafford Fabrications Internal Wastegate
-Turbo XS BOV
-Garrett T3 turbo
-Apex i AVC-R Boost Controller
-Greddy Auto Turbo Timer
-Autometer CF Boost Control gauge
-Autometer CF Oil Pressure gauge
-Autometer CF Water Temp gauge
#4
Turbo Guru
iTrader: (14)
Join Date: Oct 2002
Location: Rockville, MD
Age: 44
Posts: 4,078
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 326 d17a1 stock block and head
Complete SF turbo system:
t3 turbo/ar 60 compressor
custom bov
aluminum ic piping
aluminum shell for water/air ic
aluminum water tank for ic
modified walbro fuel pump designed by sf for returnless fuel systems
machine bent 2.5 inch exhaust
full autometer cobalt gauges:
modified a/f
fuel pressure
oil pressure
egt
greddy profec b spec 2 boost controller
blitz dc dtt turbo timer
apexi super afc 2
no track times or dyno tests yet......
Complete SF turbo system:
t3 turbo/ar 60 compressor
custom bov
aluminum ic piping
aluminum shell for water/air ic
aluminum water tank for ic
modified walbro fuel pump designed by sf for returnless fuel systems
machine bent 2.5 inch exhaust
full autometer cobalt gauges:
modified a/f
fuel pressure
oil pressure
egt
greddy profec b spec 2 boost controller
blitz dc dtt turbo timer
apexi super afc 2
no track times or dyno tests yet......
#5
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (2)
Join Date: Sep 2001
Location: Lexington, KY
Age: 41
Posts: 26,407
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 560 PARTS:
Used 2002 EX engine
Missing Link
JE Pistons 9.0:1
Crower Rods=not installed
RC Eng 440cc injectors
SX Regulator
Basz Racing 2.5' Downpipe
Greddy Evo Exhaust
Greddy type 31 Intercooler Kit
Greddy E-Manage
Silicon Hose Kit
Turbonetics T3/T4 54 Trim Turbo
Max Rev Polished Manifold
Universal Reversable Fan
Complete Engine Gasket Kit
Main, Rod, and Trust Bearings
DC Sports Battery Tie Down
DC Sports Oil Cap
Skunk2 Shift ****
Honda Head Bolts
Honda Head Gasket
HKS BOV Flange
Oil Feed Line
Oil Return Line
255 in tank fuel pump
Custom Dump Tube
clamps
extra silicon couplers
fittings for boost controller
fuel system fittings
aeroquipe heavy duty fuel hose
castrol syntec oil
oil filter
spark plugs
antifreeze
extra intercooler piping piece
air filter assembly w/ HKS power flow filter
tranny fluid
HKS BOV
ACT Clutch
Apexi AVC-R
Autometer boost guage
Apexi Autotimer
Tial 35mm Wastegate
LABOR:
Engine swap labor
Turbo Kit intall labor
Emanage install Labor
AVCR install labor
labor to build short block
labor to assemble long block
labor for base programming emanage
fuel return system labor
turbo timer install labor
boost guage install labor
Used 2002 EX engine
Missing Link
JE Pistons 9.0:1
Crower Rods=not installed
RC Eng 440cc injectors
SX Regulator
Basz Racing 2.5' Downpipe
Greddy Evo Exhaust
Greddy type 31 Intercooler Kit
Greddy E-Manage
Silicon Hose Kit
Turbonetics T3/T4 54 Trim Turbo
Max Rev Polished Manifold
Universal Reversable Fan
Complete Engine Gasket Kit
Main, Rod, and Trust Bearings
DC Sports Battery Tie Down
DC Sports Oil Cap
Skunk2 Shift ****
Honda Head Bolts
Honda Head Gasket
HKS BOV Flange
Oil Feed Line
Oil Return Line
255 in tank fuel pump
Custom Dump Tube
clamps
extra silicon couplers
fittings for boost controller
fuel system fittings
aeroquipe heavy duty fuel hose
castrol syntec oil
oil filter
spark plugs
antifreeze
extra intercooler piping piece
air filter assembly w/ HKS power flow filter
tranny fluid
HKS BOV
ACT Clutch
Apexi AVC-R
Autometer boost guage
Apexi Autotimer
Tial 35mm Wastegate
LABOR:
Engine swap labor
Turbo Kit intall labor
Emanage install Labor
AVCR install labor
labor to build short block
labor to assemble long block
labor for base programming emanage
fuel return system labor
turbo timer install labor
boost guage install labor
Last edited by C2i0v0i1C; 09-24-2003 at 06:19 PM.
#7
Premium Boosted Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (11)
Join Date: Sep 2002
Location: Arizona
Posts: 3,857
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 302 D17A2 - 5speed
-Stafford Fabrications Turbo Kit
-Stafford Fabrications PFM fuel system
-Stafford Fabrications 2.25" intercooler piping (powdercoated blue)
-Stafford Fabrications 2.5" downpipe
-T3 Turbo with .60 AR inlet
-SF Equal Runner turbo manifold
-SF FMIC
-HKS SSQ BOV
-HKS Type-1 TT
-Silver powdercoating piping
-Autometer Phantom Boost,
-Autometer Phantom A/F
-Autometer Phantom Oil Psi gauges
-Autometer Triple gauge pod
-Denso iridium IK22s
-2.5" T-304 Mandrel-bent turbo midsection (after cat)
-2.5" T-304 rear section (Mozart)
Should be it for now. I should have the kit at the end of october, all the other parts (gauges, TT, exhaust, etc) are already installed.
-Stafford Fabrications Turbo Kit
-Stafford Fabrications PFM fuel system
-Stafford Fabrications 2.25" intercooler piping (powdercoated blue)
-Stafford Fabrications 2.5" downpipe
-T3 Turbo with .60 AR inlet
-SF Equal Runner turbo manifold
-SF FMIC
-HKS SSQ BOV
-HKS Type-1 TT
-Silver powdercoating piping
-Autometer Phantom Boost,
-Autometer Phantom A/F
-Autometer Phantom Oil Psi gauges
-Autometer Triple gauge pod
-Denso iridium IK22s
-2.5" T-304 Mandrel-bent turbo midsection (after cat)
-2.5" T-304 rear section (Mozart)
Should be it for now. I should have the kit at the end of october, all the other parts (gauges, TT, exhaust, etc) are already installed.
#8
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (3)
Join Date: Aug 2002
Location: NJ
Age: 41
Posts: 4,255
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Turbonetics T3/T04B (polished/upgraded)
TiAL 35mm Wastegate
GReddy PRofec E01
GReddy E-manage
GReddy Full Auto Timer
GReddy Type S BOV
Autometer Ultra-Lite Oil Pressure
Autometer Ultra-Lite A/F
Autometer Ultra-Lite Boost
Autometer Triple Gauge Pillar
RC Engineering 370cc Injectors
Modified Fuel Rail
Aeromotive Fuel Pressure Regulator
Converted Return Fuel System
HPRacing Jspec Cat-back
Random Technology Hi-Flo Cat
Stafford Fabrication Downpipe
Stafford Fabrication Manifold
Stafford Fabrication Dump tube
Stafford Fabrication Custom Aluminum IC piping
Spearco FMIC
Walbro 255lph fuel pump
SS Oil Feed Line
SS Oil Return Line
SS Fuel Return Line
Denso IK22
Weapon R Oil Catch Can
DIY Windshield Washer Reservoir
10,000,000 -AN fittings
5000 GReddy/Trust Vacuum Lines
10w30 Synthetic
KMS Intake Manifold
ACT HD Clutch kit w/ Organic Disk
TiAL 35mm Wastegate
GReddy PRofec E01
GReddy E-manage
GReddy Full Auto Timer
GReddy Type S BOV
Autometer Ultra-Lite Oil Pressure
Autometer Ultra-Lite A/F
Autometer Ultra-Lite Boost
Autometer Triple Gauge Pillar
RC Engineering 370cc Injectors
Modified Fuel Rail
Aeromotive Fuel Pressure Regulator
Converted Return Fuel System
HPRacing Jspec Cat-back
Random Technology Hi-Flo Cat
Stafford Fabrication Downpipe
Stafford Fabrication Manifold
Stafford Fabrication Dump tube
Stafford Fabrication Custom Aluminum IC piping
Spearco FMIC
Walbro 255lph fuel pump
SS Oil Feed Line
SS Oil Return Line
SS Fuel Return Line
Denso IK22
Weapon R Oil Catch Can
DIY Windshield Washer Reservoir
10,000,000 -AN fittings
5000 GReddy/Trust Vacuum Lines
10w30 Synthetic
KMS Intake Manifold
ACT HD Clutch kit w/ Organic Disk
#13
Registered!!
iTrader: (2)
Join Date: Mar 2003
Location: Lancaster, California, US
Age: 40
Posts: 3,071
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 288 SF stage II special edition
31"x9"x3" (core) intercooler
aluminum 2.5" intercooler piping
3" stainless downpipe
Stainless equal length manifold
SF intake manifold
DHracing Cylinder head
Garrett T3 (.48 exh, .60 int with grand national turbine)
Turbo XS RFL bov
In progress....
Dhracing D17 shortblock (sleeved, semi-closed deck, pistons, rods, crank)
DHracing Clutch
DHracing flywheel
Dhracing pulleys
I trust Dave Hickman. I will trust anyone who has a 10 sec NA honda, and drives it to the track.
31"x9"x3" (core) intercooler
aluminum 2.5" intercooler piping
3" stainless downpipe
Stainless equal length manifold
SF intake manifold
DHracing Cylinder head
Garrett T3 (.48 exh, .60 int with grand national turbine)
Turbo XS RFL bov
In progress....
Dhracing D17 shortblock (sleeved, semi-closed deck, pistons, rods, crank)
DHracing Clutch
DHracing flywheel
Dhracing pulleys
I trust Dave Hickman. I will trust anyone who has a 10 sec NA honda, and drives it to the track.
#15
Registered!!
iTrader: (2)
Join Date: Mar 2003
Location: Lancaster, California, US
Age: 40
Posts: 3,071
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 288 I will post all of the pictures as soon as i get to cleaning up my engine bay. I still have a lot of misc. wires strung about from doing all the temporary crap. I dont want ANY pictures out with my car looking like crap with the new turbo system. It is just way too nice to put it down like that.
#16
Registered!!
iTrader: (2)
Join Date: Mar 2003
Location: Lancaster, California, US
Age: 40
Posts: 3,071
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 288 Sorry for the double post, but my best time was a 13.6 @ 102 mph on only 9 psi. That was before all of my new work. All i had was the turbo system.