K24a1 swap (Coming Soon)
#33
Registered!!
iTrader: (18)
Join Date: Mar 2003
Posts: 2,934
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 288 Re: K24a1 swap (Coming Soon)
Why? If I'm wrong I have nice people like you to correct me.
As to the trans, I misspoke. AROUND HERE the only 6 speed available under $1000 has 170K. I would much rather spend another $500-1000 more for a trans with less than half the mileage but, you do what you want. Around here the 5 speeds ARE $400-600.
As to the trans, I misspoke. AROUND HERE the only 6 speed available under $1000 has 170K. I would much rather spend another $500-1000 more for a trans with less than half the mileage but, you do what you want. Around here the 5 speeds ARE $400-600.
http://forums.clubrsx.com/showthread.php?t=734071
http://forums.clubrsx.com/showthread...ghlight=tranny
http://forums.clubrsx.com/showthread...ghlight=tranny
there you go, around 800-900 shipped or best offer for a 6 speed with 60k on it. I can find these all day long.
You need to search better and i hope you're not searching this lame civic site for answers or parts. this site went down the drain
If texas is selling trans for 1500-3500 (let me remind you that a whole K20a2 with tranny is around 3k) then texas business dealers are ripping you a new one.
Last edited by D5cIvIc; 08-22-2010 at 03:45 AM.
#35
Registered!!
Join Date: May 2010
Location: Funkytown, Tx
Posts: 3,662
Likes: 0
Received 2 Likes
on
2 Posts
Rep Power: 210 Re: K24a1 swap (Coming Soon)
Open mouth, insert foot. http://dallas.craigslist.org/ftw/pts/1913537701.html
#36
PITA Admin
Administrator
iTrader: (1)
Join Date: Dec 2008
Location: TN
Age: 52
Posts: 14,799
Received 1,451 Likes
on
1,204 Posts
Rep Power: 339 Re: K24a1 swap (Coming Soon)
Wow! and here i am content with my D17A2, while you going from K20 to K24...
Are you going to reinforce the K24 bottom? (idk if that is even necessary, actually...)
Are you going to reinforce the K24 bottom? (idk if that is even necessary, actually...)
#37
PITA Admin
Administrator
iTrader: (1)
Join Date: Dec 2008
Location: TN
Age: 52
Posts: 14,799
Received 1,451 Likes
on
1,204 Posts
Rep Power: 339 Re: K24a1 swap (Coming Soon)
actually miata's are not really oversteer.
A good setup in them is neutral, you can understeer or oversteer just by how you work the throttle, even. They are pretty close to 50/50 weight deistribution (note how the rear tire is almost wiping your butt since driver is way in the back).
I own a sport hard-s suspension 01 miata (one of the most oversteering of them, actually, with lsd and chassis bracing...).
remeber also that they do not have gobs of power (like our D17...)
A good setup in them is neutral, you can understeer or oversteer just by how you work the throttle, even. They are pretty close to 50/50 weight deistribution (note how the rear tire is almost wiping your butt since driver is way in the back).
I own a sport hard-s suspension 01 miata (one of the most oversteering of them, actually, with lsd and chassis bracing...).
remeber also that they do not have gobs of power (like our D17...)
#38
Low and slow!
Thread Starter
Join Date: Jan 2010
Location: Marion, NC
Posts: 1,628
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 190 Re: K24a1 swap (Coming Soon)
Na I am not going to reinforce the block. It really doesnt need it till I get to 400 whp. The real reason why I want the k24 is because of the torque on them.
#39
Trance Addict
Re: K24a1 swap (Coming Soon)
My friend desperately wants an EP3 now. After coming here, I realize just how awesome this car can be, and showing him some stuff now he wants one even more. Best of luck with the swap amigo.
#40
PITA Admin
Administrator
iTrader: (1)
Join Date: Dec 2008
Location: TN
Age: 52
Posts: 14,799
Received 1,451 Likes
on
1,204 Posts
Rep Power: 339 Re: K24a1 swap (Coming Soon)
ah, sorry, i should have worded that better - i was actually thinking on higher rev redline. you might miss that!
#41
Low and slow!
Thread Starter
Join Date: Jan 2010
Location: Marion, NC
Posts: 1,628
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 190 Re: K24a1 swap (Coming Soon)
I have 2 more weeks and I get to get my k24 finally so I can start my build. Gonna get it break it down, clean it, paint it, hone it, and thinking about porting and polishing the head.
If I remember it right isnt it 400 grit to hone the cylinders with.
If I remember it right isnt it 400 grit to hone the cylinders with.
#42
Johnny Tran stole my S2000 that I had over $100K in mods.
Re: K24a1 swap (Coming Soon)
Yes!!!It's almost here.I was waiting for it since you mentioned the swap to me in July.I'm guessing you'll have it done around December?You still gonna get that Miata?
#43
Low and slow!
Thread Starter
Join Date: Jan 2010
Location: Marion, NC
Posts: 1,628
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 190 Re: K24a1 swap (Coming Soon)
Ya its getting close and its bout to kill me lol. Hopefully it will be done by december but even then I will have to wait till February so that I can get kpro. After that it will definitely be in the car. And ya still going to be getting a miata.
#44
Johnny Tran stole my S2000 that I had over $100K in mods.
Re: K24a1 swap (Coming Soon)
Damn.All the way to February.About a 7 month wait.I wonder how long it's gonna be until you turbo that beast.lol
#45
Low and slow!
Thread Starter
Join Date: Jan 2010
Location: Marion, NC
Posts: 1,628
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 190 Re: K24a1 swap (Coming Soon)
I have bout a week till I get my motor and I have been thinking bout some changes. I dont think I am going with a vtec killer setup. I think I am just going to go with a k24/k20. I am going to get the k24a1 and k20a2 head. I will be using the k20a2 oil pump, chain tensioner, chain guides. I will have probably use k24a2 pistons with the k24a1 rods. I will pick up a prb intake manifold use it as well. This still will be a great setup.
#46
Low and slow!
Thread Starter
Join Date: Jan 2010
Location: Marion, NC
Posts: 1,628
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 190 Re: K24a1 swap (Coming Soon)
Well I get my money this week and I am stoked. I am going to go pick up the block this weekend and while I am there I am going to do a compression test. Hopefully it comes out all right. I found someone that is going to sell me the k24a2 pistons and rods yesterday. They are in great shape just need to pick up some new piston rings for them. I may go this weekend to pick them up to, he is selling them for 130.
#47
Johnny Tran stole my S2000 that I had over $100K in mods.
Re: K24a1 swap (Coming Soon)
Damn it.It's so close now.Even though it's not my car,I still can't wait.lol
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Default_Slayer
Electrical DIY
10
12-04-2022 07:56 AM
GolNat
Archive - Parts for Sale
10
09-10-2015 08:25 PM