00 Civic Si vs 01 civic Ex
#1
Registered!!
Thread Starter
Join Date: Dec 2004
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 00 Civic Si vs 01 civic Ex
i lined up next to my friend with a 00 si with i/h/e,vtec controller, and cam gears and i have i/h/e and we both agreed we would go to the next light because i had to make a left. the light quickly turned green b4 i could rev it up to launch but he managed to get his launch off so i started out as i would at any normal light. he obviously beat me off the line but i cought up and stayed side to side with him until we got to the light. he didnt know wat to say to me because he talks all this **** about sohc's saying theyre weak as hell so he called me rite after and was like "i missed second gear" which he obviously didnt.
#4
Registered!!
Thread Starter
Join Date: Dec 2004
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 he didnt miss a gear because he has the loudest exhaust and it didnt appear at all that he missed a gear because inbetween shifting his exhaust becomes completely silent and it didnt when we were going
#10
Registered!!
Join Date: Nov 2002
Location: NH
Age: 43
Posts: 1,065
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 I'm not going to sit here and call BS or try to down talk you at all. All I'm going to say is that he definitely missed a shift or he was an incredibly terrible driver. With the mods that he has done to that car, it should be running mid to upper 14's with a good driver. Well, anything can happen on the street so nice run man. Props to you for being a better driver.
#11
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (95)
Join Date: Sep 2002
Location: NV
Age: 43
Posts: 51,241
Likes: 0
Received 18 Likes
on
13 Posts
Rep Power: 789 stock 00 si manual 140whp
stock 01 ex manual 110whp
not to mention the Si responds much better to mods, especially if the vtec controler and cam gear were tuned. He must've been a terrible driver.
stock 01 ex manual 110whp
not to mention the Si responds much better to mods, especially if the vtec controler and cam gear were tuned. He must've been a terrible driver.
#12
O RLY
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (1)
Join Date: Dec 2001
Location: Milwaukee, Wisconsin, US
Age: 44
Posts: 10,031
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 377
Originally Posted by Vtecnoga
i lined up next to my friend with a 00 si with i/h/e,vtec controller, and cam gears and i have i/h/e and we both agreed we would go to the next light because i had to make a left. the light quickly turned green b4 i could rev it up to launch but he managed to get his launch off so i started out as i would at any normal light. he obviously beat me off the line but i cought up and stayed side to side with him until we got to the light. he didnt know wat to say to me because he talks all this **** about sohc's saying theyre weak as hell so he called me rite after and was like "i missed second gear" which he obviously didnt.
or you're full of it.
i'll give you the benefit of the doubt and say that your friend can't drive to save his life. A 6th gen Si with i/h/e vafc and cam gears is capable of probably a 14.4.
#13
O RLY
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (1)
Join Date: Dec 2001
Location: Milwaukee, Wisconsin, US
Age: 44
Posts: 10,031
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 377
Originally Posted by Vtecnoga
i dont know wat to tell u maybe if we have been going a further distance but i kept up with him
0-50 or 0-whenever. doesn't matter.
your friend needs to be slapped and have his keys taken away.
#14
O RLY
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (1)
Join Date: Dec 2001
Location: Milwaukee, Wisconsin, US
Age: 44
Posts: 10,031
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 377
Originally Posted by HorrorSkopes
i smell BS...
w/ those mods he should be doing low 15's, high 14's. Hmmm....
w/ those mods he should be doing low 15's, high 14's. Hmmm....
#19
Registered!!
iTrader: (8)
Join Date: Feb 2003
Location: familycar's Moms Room
Posts: 1,555
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 276
Originally Posted by HorrorSkopes
i smell BS...
w/ those mods he should be doing low 15's, high 14's. Hmmm....
w/ those mods he should be doing low 15's, high 14's. Hmmm....
Whats the big deal an EX should be capable of high 14's since its gearing is better. If a DX can pull 15.1 with a few mods why couldnt someone with an EX hit high 14's?
Correct S2000man?
#22
O RLY
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (1)
Join Date: Dec 2001
Location: Milwaukee, Wisconsin, US
Age: 44
Posts: 10,031
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 377
Originally Posted by DIZZLE
Whats the big deal an EX should be capable of high 14's since its gearing is better. If a DX can pull 15.1 with a few mods why couldnt someone with an EX hit high 14's?
Correct S2000man?
Correct S2000man?
#23
Registered!!
Join Date: Apr 2003
Location: Edmonton
Age: 40
Posts: 1,597
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Because the EX has only 10 more HP and a lot more weight, thats just the simple answer though. Short of massive weight reduction, or FI (incl. N2O) I can't see an EX hitting 14s...
#24
Registered!!
iTrader: (8)
Join Date: Feb 2003
Location: familycar's Moms Room
Posts: 1,555
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 276
Originally Posted by S2000man01
yeah he has a LOT more than a few mods. lol.
AEM V2
Kamakaze header with Casper's O2 sim
Tanabe SMR
Removed Power Steering
Unorthodox Racing Crank Pulley
ES Motor mounts (rear did not fit had to cut)
So this is the recipe to low 15's? "lol"
#25
Registered!!
iTrader: (8)
Join Date: Feb 2003
Location: familycar's Moms Room
Posts: 1,555
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 276
Originally Posted by dre2600
Because the EX has only 10 more HP and a lot more weight, thats just the simple answer though. Short of massive weight reduction, or FI (incl. N2O) I can't see an EX hitting 14s...
#26
Banned
Join Date: Aug 2003
Location: Tampa, FL
Age: 45
Posts: 1,620
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 The guy didnt miss shift because I've been in the same situatiuon with a friend of mine, but my races lasted through 3rd gear and its in 3rd where the 7th gen begins to lose, not 2nd. I wasnt using nitrous at the time if anyone is dumb enough to ask.
#27
AKA Mr. 60ft. Not to be confused with Civic_Redline
iTrader: (3)
Join Date: Apr 2004
Location: Barksdale AF Base LA
Age: 43
Posts: 752
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 I raced an SI with the same mods, minus the cam gear and beat him with a 15.7 to his 15.8. So yeah there are some bad drivers out there or maybe his tuning was ****ed up. The one Si that did manage to beat me started pulling away slowly in third, 1st through second we were even, even with my shitty launch. Ask 1320racing he was right behind us. The SI should win with a good driver and proper tuning against your average 7thgen with I/h/E, but it's not always the case. Good kill. On the street you never know what could happen.
Dizzle when are you gonna let me know where you are from so maybe we can set something up? You talk **** but you avoid my question. Your missing the point that my car weighs 400lbs less then the avg Ex and I have no power steering and a crank pulley which most people don't, plus I run on DR's or my forged 17's(lighter and less rotational inertia than stock EX wheels).
Dizzle when are you gonna let me know where you are from so maybe we can set something up? You talk **** but you avoid my question. Your missing the point that my car weighs 400lbs less then the avg Ex and I have no power steering and a crank pulley which most people don't, plus I run on DR's or my forged 17's(lighter and less rotational inertia than stock EX wheels).
Last edited by Redline04; 02-19-2005 at 12:41 AM.
#29
Powered by Honda...
iTrader: (1)
Join Date: Sep 2004
Location: Savannah, GA
Age: 35
Posts: 851
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 249
Originally Posted by Michalo187
He probably did miss a gear cause that thing would have spanked you.
00 Si's are pretty quick... I like them a lot.
#30
Registered!!
iTrader: (8)
Join Date: Feb 2003
Location: familycar's Moms Room
Posts: 1,555
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 276 [QUOTE=
Dizzle when are you gonna let me know where you are from so maybe we can set something up? You talk **** but you avoid my question. Your missing the point that my car weighs 400lbs less then the avg Ex and I have no power steering and a crank pulley which most people don't, plus I run on DR's or my forged 17's(lighter and less rotational inertia than stock EX wheels).[/QUOTE]
Unless its a DH racing 20 whp crank pulley( ), it aint gonna do much. Our oem pulleys only weigh about 8 lbs. It would be more beneficial to upgrade the flywheel which is 23 lbs to an aftermarket one that weights 13 lbs.
Trust me man i would love to own your ***, but i live in vegas.
Where exactly did you get this weight loss of 200 lbs?
Dizzle when are you gonna let me know where you are from so maybe we can set something up? You talk **** but you avoid my question. Your missing the point that my car weighs 400lbs less then the avg Ex and I have no power steering and a crank pulley which most people don't, plus I run on DR's or my forged 17's(lighter and less rotational inertia than stock EX wheels).[/QUOTE]
Unless its a DH racing 20 whp crank pulley( ), it aint gonna do much. Our oem pulleys only weigh about 8 lbs. It would be more beneficial to upgrade the flywheel which is 23 lbs to an aftermarket one that weights 13 lbs.
Trust me man i would love to own your ***, but i live in vegas.
Where exactly did you get this weight loss of 200 lbs?