01 Civic Looking to go Show Car - Race Car - Street Car
Re: 01 Civic Looking to go Show Car - Race Car - Street Car
I hope you have allowed for turning, I know that for our car they arms could not be nearly as simple as yours, with a wide tire you would only get about a 40% radius, we are now nearly 70%. Looks as though you have mig welded yours and used mild steel heim joints. This is not a part that should be built by someone who is not accustom to building quality and proved parts. I have been building racecars for a number of years and have seen my products go 234mph in the quarter mile. I am confident that my products work and are as safe as possible. I hope that you have aslo included plug welds on your tube ends. Thanks for the pics. Id like to see a finished project.




Re: 01 Civic Looking to go Show Car - Race Car - Street Car
eh not really feeling what has been done so far (i.e. roof scoop, fender flares, tails, trunk)...just not my style, but not my car either...BUT i'm lovin the work put in, very honorable to see this, and i'm glad to see a non-half assed "show" civic. hoping all the work goes smooth...and if you're going to pump out the numbers you say you are, **** people hating on the look, you'll have the fastest car on this forum.
ThE CoRRupToR
iTrader: (13)
Joined: Oct 2002
Posts: 5,985
Likes: 0
From: los angeles, California, US
Rep Power: 347 




Re: 01 Civic Looking to go Show Car - Race Car - Street Car
eh not really feeling what has been done so far (i.e. roof scoop, fender flares, tails, trunk)...just not my style, but not my car either...BUT i'm lovin the work put in, very honorable to see this, and i'm glad to see a non-half assed "show" civic. hoping all the work goes smooth...and if you're going to pump out the numbers you say you are, **** people hating on the look, you'll have the fastest car on this forum.
Joined: Jul 2002
Posts: 4,209
Likes: 0
From: 650 (SC_RWC) CA
Rep Power: 333 

Re: 01 Civic Looking to go Show Car - Race Car - Street Car
get a killer pant job and pull some crazy numbers on the k20 ad you'll fo well in show. MOds are xrazy by themselves. A lot of work. Like the doors, origonal. Too much going on for me. transformers for sure.
Re: 01 Civic Looking to go Show Car - Race Car - Street Car
i can clearly see this is going to turn into a pissing contest, so im not wasting any more time here. and for the record our cars are not going to go 234mph....
I hope you have allowed for turning, I know that for our car they arms could not be nearly as simple as yours, with a wide tire you would only get about a 40% radius, we are now nearly 70%. Looks as though you have mig welded yours and used mild steel heim joints. This is not a part that should be built by someone who is not accustom to building quality and proved parts. I have been building racecars for a number of years and have seen my products go 234mph in the quarter mile. I am confident that my products work and are as safe as possible. I hope that you have aslo included plug welds on your tube ends. Thanks for the pics. Id like to see a finished project.






Registered!!
iTrader: (6)
Joined: Feb 2005
Posts: 1,303
Likes: 0
From: viva las vegas
Rep Power: 273 


Re: 01 Civic Looking to go Show Car - Race Car - Street Car
stop the hating... you all are just jealous that you cant do the same **** he is doing. PROPS MAN! im lovin the car. cant wait to see the finished product.
Re: 01 Civic Looking to go Show Car - Race Car - Street Car
I Hunt Goats, Rams, And Mustangs.
iTrader: (6)
Joined: May 2005
Posts: 2,360
Likes: 1
From: CenTex
Rep Power: 280 





Re: 01 Civic Looking to go Show Car - Race Car - Street Car
Unless the laws are different where you are at.. I noted that you have "Street car" as one of the specs of this build... But seeing this picture:

you have modified the frame of the car. Last i checked that was illegal in most states.

you have modified the frame of the car. Last i checked that was illegal in most states.
I Hunt Goats, Rams, And Mustangs.
iTrader: (6)
Joined: May 2005
Posts: 2,360
Likes: 1
From: CenTex
Rep Power: 280 





Re: 01 Civic Looking to go Show Car - Race Car - Street Car
yeah that would make more sence..lol can compare a d17 to a k20..thats fawking stupid....d17 to d17 and k20 to k20.
Re: 01 Civic Looking to go Show Car - Race Car - Street Car
So are tinted windows in some states...yet people keep doing it.
We get that you dont like the car TransformedBG....move on.
Re: 01 Civic Looking to go Show Car - Race Car - Street Car
Re: 01 Civic Looking to go Show Car - Race Car - Street Car
although some of the cars aspects i dont like i respect that fact that its being done in a 7thgen. I gotta see the final product, it should be crazy.
Good Job
Good Job
Re: 01 Civic Looking to go Show Car - Race Car - Street Car
The car will be going to SEMA this year. However it will be in a Sponsors booth so there will be no interior to show off the welds.
Best date I can give you is that it will run by SEMA. (End of Oct)
Best date I can give you is that it will run by SEMA. (End of Oct)
My Pony Princess is the inspiration for my ride.
iTrader: (17)
Joined: Apr 2006
Posts: 5,217
Likes: 0
Rep Power: 0 
Re: 01 Civic Looking to go Show Car - Race Car - Street Car
I still like the primer...... Any idea as to what kind of paint scheme ya'll are going to do when its ready? Simple or wild?
Joined: Jul 2003
Posts: 30,677
Likes: 1
From: Dallas, PA
Rep Power: 608 










Re: 01 Civic Looking to go Show Car - Race Car - Street Car
I am not too far from you. I live in the Wilkes-Barre area. If you go to any local shows, I would be really interested and meeting up with you guys.
Re: 01 Civic Looking to go Show Car - Race Car - Street Car
well dru106 mentioned fastest 7thgen, not d17 or k20, so i stated the fact he(innovators) can beat mostly/majority members on this site, he didnt mentioned fastest d17 or k20, but over all in general.


