Rep Power: 0

does anyone have a picture of the autopower roll bar installed in a 7th gen. i really need to see where the mounting points are gonna be. i ordered the street-sport model. but it wont come in for 4 weeks, and i am having the back seat taken out and fiberglassing subs and amps into the back seat, but i need to accomodate for the roll bar that will be there...so i need to see where its gonna be so they know where to not fiberglass. i really appreciate anyone that can help. i will rep yah if u can get me a good pic too. if thats any incentive.

 
Rep Power: 388

https://www.civicforums.com/forums/2...power+roll+bar

 
Rep Power: 0

cool. but i really need to see where the back 2 bars bolt down to. i cant tell exactly where in the pic.

 
Rep Power: 287

I just posted this a couple of days ago, I havn't been able to find a picture with the bolts at the bottom either. However, I'm pretty sure the front bars bolt just behind the rear mounting bolt behind the seats and the back bars mount just in front of the rear seats. I've heard you have to drill your own holes to mount it, so I'm assuming that you can fudge the mounting location slightly. (I really want one of these with a set of racing seats, harnesses, pads. It would bring a whole different expirence to driving.)

 
Rep Power: 281

did you get that powdercoated blue, or did you order it that way?

 
Rep Power: 239

just outa curiosity, is that bar going in for the track or purely cosmetic

 
Rep Power: 0

its for cosmetics and somewhat for safety. i already have my 4 point cam lock harnesses and my carbon fiber racing seats. i need something to put the harnesses on and safely and i dont have a driver airbag so i wanna be sure that its something safe the will hold me to my seat. also since the entire backseat is coming out for fiberglassing and audio.

 
Rep Power: 287

That's not a picture of my car I found it on an old thread. I read on the Autopower website that all of the bars come painted black. So If you want color, you'll probably have to take it to somewhere. Right, either powder coat or paint will work. Roll bars are for safety. Racing harnesses need to be mounted a certian way to avoid problems. Some people on here don't like rollin with harnesses. but I do I'd like to get it in a couple of months.