where is the DIY's!!!!!!!!!!!!!!!!!!!111
Thread Starter
Registered!!
Joined: Jul 2004
Posts: 120
Likes: 0
From: Williamsburg
Rep Power: 0 
where is the DIY's!!!!!!!!!!!!!!!!!!!111
I want to blackout my headlights so i search in lighting to find the diy, iget nothing other than other people who can't find it either!!!!!!!!!!!!!!1
then i go to tech&diy's an get the same ****in thing,i'm going to throw this ****in compter out my front window!!!! Alli want is blacked out headlight diy for an 03 civic can somebody please help me out before i go insane!!!!!!!!
then i go to tech&diy's an get the same ****in thing,i'm going to throw this ****in compter out my front window!!!! Alli want is blacked out headlight diy for an 03 civic can somebody please help me out before i go insane!!!!!!!!
Registered!!
Joined: Nov 2005
Posts: 299
Likes: 0
From: Oakville, ON
Rep Power: 0 
set the oven to 225 .. put one light in at a ime on a bankin sheet so the grill doesnt melt the plastic.. watch iit carfully so it doesnt melt.. check every 3 or so min's.. it only takes like 6 mins for the sealant to melt.. jus rip' em apart.. their should be philips head screws holding the housing to the lens..
take it off.. the amber inserts pop out as their clipped in.. theirs anothr clear reflector under that, it shud pop out.. paint the housing.. prety simply.. a DIY will tell u the same thing. hope that helps. . its prty easy jus make sure not to lett he light melt!! other wise it wont go back on.. once ur done painting. let it set for a few hours.. reverse the process.. put lights (lens, backing) in seperately to let the sealant heat up again fill the gap with silicone.. press them back together and wipe the excess sealant from the lights.. it'd help to use platic clamps to hold hte two pieces together.. then run a bead of sealant over the crack once dry to prevent them from fogging.
take it off.. the amber inserts pop out as their clipped in.. theirs anothr clear reflector under that, it shud pop out.. paint the housing.. prety simply.. a DIY will tell u the same thing. hope that helps. . its prty easy jus make sure not to lett he light melt!! other wise it wont go back on.. once ur done painting. let it set for a few hours.. reverse the process.. put lights (lens, backing) in seperately to let the sealant heat up again fill the gap with silicone.. press them back together and wipe the excess sealant from the lights.. it'd help to use platic clamps to hold hte two pieces together.. then run a bead of sealant over the crack once dry to prevent them from fogging.
Last edited by 4_door_fury; Mar 5, 2006 at 08:46 AM.
Registered!!
Joined: Aug 2005
Posts: 2,551
Likes: 0
From: Ottawa
Rep Power: 278 Here's a link for the 04-05, but Im sure its similar for the 01-03. http://www.7thgencivic.com/forums/sh...d.php?t=203502
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Ziggy1999
7th Generation Civic 2001 - 2005
10
Oct 15, 2015 07:56 PM
meicalnissyen
Mechanical Problems/Vehicle Issues and Fix-it Forum
7
Sep 25, 2015 12:12 AM
