Rep Power: 0

does anybody remember back in the 2003 issue of HCI it was all about widebody kits and on the front it had a gray NSX ?? well in the issue it talked about a lot about widebody kits and it had an article about a kit available for the 2001 - up coupe's. the kit included front fenders .. door panels and rear quarter panels. and i went onto their site last night and couldn't find it anywhere so i sent them an email asking how much the kit is ... just curious thou does anybody on this site know how much it is. because im a show car for a local shop and the show season is fixing to start back up and having a widebodied 7thgen would def. get attention in my area.

 
Rep Power: 289

i looked for that too and couldnt find it anywhere... its just the octane kit with the wide body add ons

 
Rep Power: 0

what wide body add ons dide you get ??? the one featured in HCI had door panels and rear quarter panels. well hopefully they'll respond to my email i sent. so maybe i'll find out soon enough. i'll be sure to post what they say

 
Rep Power: 314

theres a widebody kit for the si

 
Rep Power: 0

yea i want to know about this too

 
Rep Power: 0

thats old news .... i'm talking about the coupe's

 
Rep Power: 0

That car in HCI is my car. It was featured in the December Issue. The front kit is not an octane. It's actually JT autostyle's Evo V no Fog with custom Skyline R34 Nismo corner lights. The widebod kit is a 6 piece kit. It consists of 2 fenders, 2 door panels, and 2 rear 1/4 panels. The kit costs about $1000.00 (without the front, back and side kits) If you have anymore questions, feel free to ask.

 
Rep Power: 511

custom:
http://www.7thgencivic.com/forums/sh...ight=wide+body

retail kit:
http://www.7thgencivic.com/forums/sh...ight=wide+body

 
Rep Power: 0

^^ the first kit featured is a kit that's sorta rare to find. There isn't a distributor on the west coast and the dealers are hard to come by cause they have to purchase those kits in lots of 10 in order to be released to the public.

The second kit is a kit that can be found a little easier then the first one. This kit however does not really fall into the catagory of widebody in my opinion. It's more of a fender flared kit then it is widebody, taking into account that only the fender portions of the car are made wide as opposed to the whole side of the car.

The widebody I have can be found at jtautostyle.

 
Rep Power: 0

the kit you have on your car is the one i'm talking about ... how much was it ?

 
Rep Power: 0

He mentioned in a post above that it is around $1000 without the rest of the body kit

 
Rep Power: 0

hmmmmmmmm thats not too bad then

 
Rep Power: 0

my buddies from import image do custom wide body.He has the cleanest wide body celica IMO..it was at the last HIN in south cali...hes workin on my friends 01 lx civic coupe right now..check out the site..and go to image members and look at my car ^^ hehe.. www.importimage.biz

 
Rep Power: 0

nvm..site is down =(..sorry bout that

 
Rep Power: 328

The HCI car was a prototype kit that JT Autostyle made. They modified their standard kit. I think it said they were planning on releasing it later this year as a production kit. As far as widebody goes, I think that the only one currently offered is made by SVE Imageworks.

 
Rep Power: 0

that "custom" one above that abermop or whatever said is just the versus motorsport widebody, which is like 1000 canadian

 
Rep Power: 0

your lookink to pay about 1200-1800 depnding on the peaces ---witch is a steal my widebody was done from ground up i spnt 6k doing widebody alone --not includin custom vents or my is300 covertion in front and rear ----pic soon to post ---hvng cmptr prblms

 
Rep Power: 316

you can get the Jtautostyle wide body kit the front fenders, door pannels which shaves the door handles and rear quarters for 750 + shipping you wnat front and rear bumper its about 1100 + shipping. i called them last week about it.
and it has nsx vents in it allready.