Going to be imstalling springs today Any pointers?
Thread Starter
Registered!!
iTrader: (2)
Joined: Sep 2011
Posts: 118
Likes: 0
From: Brentwood, CA
Rep Power: 179 
Going to be imstalling springs today Any pointers?
Hey, so im going to.be installing my tein s techs today, I read over thr DIY about 10 times and I think I got it but is there anything I should look out for? Any problems that I might run into? Im going to spray all the bolts with pb blaster an hour before I start working on it. Anything else I should do? Thanks. This is my first time working on suspension.
Joined: Aug 2003
Posts: 21,620
Likes: 1,252
From: Las Vegas, NV
Rep Power: 512 
Re: Going to be imstalling springs today Any pointers?
I wouldn't recommend that unless you were an actual doctor of sorts.. Patience, however... 
But seriously, take your time, double check your work. A torque wrench is your friend.
Separating the tie rod from the strut is prolly gonna frustrate you.. Just a heads up.. Last time I separated my tie rods to adjust my suspension's height, I tore the boots on both of them, and that was while using a tie rod separator, no less..
But seriously, take your time, double check your work. A torque wrench is your friend.
Separating the tie rod from the strut is prolly gonna frustrate you.. Just a heads up.. Last time I separated my tie rods to adjust my suspension's height, I tore the boots on both of them, and that was while using a tie rod separator, no less..
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Wankenstein
Suspension Performance Modifications
13
Sep 26, 2023 06:44 PM
loosescrew84
Mechanical Problems/Vehicle Issues and Fix-it Forum
16
Aug 11, 2015 07:08 PM
EM_WON
Suspension Performance Modifications
4
Jul 22, 2015 06:49 PM
