roll cage
Thread Starter
Registered!!
Joined: Feb 2003
Posts: 401
Likes: 0
From: Bellevue, Washington, US
Rep Power: 0 
roll cage
anyone know if they make bolt on rear section roll cages for the EM2? if so where can i get it? i saw one on optauto.com but not sure if its a bolt on or weld on.
Autocross Junky
Hey! Look At Me!! I'm a Supporting Member!!
Joined: Oct 2002
Posts: 7,211
Likes: 0
From: Las Vegas, Nevada, US
Rep Power: 380 
autopower makes a cage for us, its only a half cage, so do be legal for wheel to wheel racing you'll need to 1. weld it in and 2. add door beams as well as a front section (I'm pretty sure autopower makes that stuff too)
Autocross Junky
Hey! Look At Me!! I'm a Supporting Member!!
Joined: Oct 2002
Posts: 7,211
Likes: 0
From: Las Vegas, Nevada, US
Rep Power: 380 Took me a while to find it, as its covered in the stock rules rather then STS..
"Roll bars and roll cages may be added (see Appendix C). It is strongly recommended that they be constructed according to Section 18 of the current GCR. Roll bars may be welded. Roll cages must be bolted, not welded, into the automobile and within the driver/passenger compartment. A roll cage has more than four attachment points to the body or frame, or has bracing both fore and aft of the main hoop."
Rules can be found here...They are slightly out dated (2002) but most of it still applies
STS rules
Stock Rules
The rule regarding Roll cages/bars is covered under 13.2 Bodywork, Section G.
"Roll bars and roll cages may be added (see Appendix C). It is strongly recommended that they be constructed according to Section 18 of the current GCR. Roll bars may be welded. Roll cages must be bolted, not welded, into the automobile and within the driver/passenger compartment. A roll cage has more than four attachment points to the body or frame, or has bracing both fore and aft of the main hoop."
Rules can be found here...They are slightly out dated (2002) but most of it still applies
STS rules
Stock Rules
The rule regarding Roll cages/bars is covered under 13.2 Bodywork, Section G.
Registered!!
iTrader: (3)
Joined: Jan 2003
Posts: 1,668
Likes: 0
From: Redmond, Washington, US
Rep Power: 0 Re: roll cage
Originally posted by EM2HK1
anyone know if they make bolt on rear section roll cages for the EM2? if so where can i get it? i saw one on optauto.com but not sure if its a bolt on or weld on.
anyone know if they make bolt on rear section roll cages for the EM2? if so where can i get it? i saw one on optauto.com but not sure if its a bolt on or weld on.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
robjcivic
Mechanical Problems/Vehicle Issues and Fix-it Forum
3
Mar 12, 2017 12:10 PM
